SC16C554IB64,151 NXP Semiconductors, SC16C554IB64,151 Datasheet - Page 13

• Manufacturer Part Number: SC16C554IB64,151
• Description: IC UART QUAD SOT314-2
• Manufacturer: NXP Semiconductors

Specifications of SC16C554IB64,151

• Number Of Channels: 4, QUART
• Fifo's: 16 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Transmit Fifo: 16Byte
• Receive Fifo: 16Byte
• Transmitter And Receiver Fifo Counter: Yes
• Data Rate: 5Mbps
• Package Type: LQFP
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935270074151; SC16C554IB64-S; SC16C554IB64-S

Philips Semiconductors
6. Functional description
9397 750 11616
Product data
The SC16C554/554D provides serial asynchronous receive data synchronization,
parallel-to-serial and serial-to-parallel data conversions for both the transmitter and
receiver sections. These functions are necessary for converting the serial data
stream into parallel data that is required with digital data systems. Synchronization for
the serial data stream is accomplished by adding start and stop bits to the transmit
data to form a data character. Data integrity is insured by attaching a parity bit to the
data character. The parity bit is checked by the receiver for any transmission bit
errors. The electronic circuitry to provide all these functions is fairly complex,
especially when manufactured on a single integrated silicon chip. The
SC16C554/554D represents such an integration with greatly enhanced features. The
SC16C554/554D is fabricated with an advanced CMOS process to achieve low drain
power and high speed requirements.
The SC16C554/554D is an upward solution that provides 16 bytes of transmit and
receive FIFO memory, instead of none in the 16C454. The SC16C554/554D is
designed to work with high speed modems and shared network environments that
require fast data processing time. Increased performance is realized in the
SC16C554/554D by the larger transmit and receive FIFOs. This allows the external
processor to handle more networking tasks within a given time. In addition, the four
selectable levels of FIFO trigger interrupt and automatic hardware/software flow
control is uniquely provided for maximum data throughput performance, especially
when operating in a multi-channel environment. The combination of the above greatly
reduces the bandwidth requirement of the external controlling CPU, increases
performance, and reduces power consumption.
The SC16C554/554D combines the package interface modes of the 16C454/554 and
68C454/554 series on a single integrated chip. The 16 mode interface is designed to
operate with the Intel-type of microprocessor bus, while the 68 mode is intended to
operate with Motorola and other popular microprocessors. Following a reset, the
SC16C554/554D is downward compatible with the 16C454/554 or the 68C454/554,
dependent on the state of the interface mode selection pin, 16/68.
The SC16C554/554D is capable of operation to 1.5 Mbits/s with a 24 MHz crystal
and up to 5 Mbits/s with an external clock input (at 3.3 V and 5 V; at 2.5 V the
maximum speed is 3 Mbits/s).
The rich feature set of the SC16C554/554D is available through internal registers.
Automatic hardware/software flow control, selectable transmit and receive FIFO
trigger levels, selectable TX and RX baud rates, infrared encoder/decoder interface,
modem interface controls, and a sleep mode are all standard features. MCR[5]
provides a facility for turning off (Xon) software flow control with any incoming (RX)
character. In the 16 mode, INTSEL and MCR[3] can be configured to provide a
software controlled or continuous interrupt capability. Due to pin limitations of the
64-pin package, this feature is offered by two different LQFP64 packages. The
SC16C554D operates in the continuous interrupt enable mode by bonding INTSEL to
V
INTSEL to GND internally.
CC
internally. The SC16C554 operates in conjunction with MCR[3] by bonding
Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
Rev. 04 — 19 June 2003
SC16C554/554D
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
13 of 53