SC16C554IB64,151 NXP Semiconductors, SC16C554IB64,151 Datasheet - Page 33

• Manufacturer Part Number: SC16C554IB64,151
• Description: IC UART QUAD SOT314-2
• Manufacturer: NXP Semiconductors

Specifications of SC16C554IB64,151

• Number Of Channels: 4, QUART
• Fifo's: 16 Byte
• Voltage - Supply: 2.5V, 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Transmit Fifo: 16Byte
• Receive Fifo: 16Byte
• Transmitter And Receiver Fifo Counter: Yes
• Data Rate: 5Mbps
• Package Type: LQFP
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935270074151; SC16C554IB64-S; SC16C554IB64-S

Philips Semiconductors
9397 750 11616
Product data
Table 21:
Table 22:
[1]
Bit
5
4
3-0
Cont-3
0
1
0
1
X
X
X
1
0
1
When using software flow control the Xon/Xoff characters cannot be used for data transfer.
Symbol
EFR[5]
EFR[4]
EFR[3-0]
Cont-2
0
0
1
1
X
X
X
0
1
1
Enhanced Feature Register bits description
Software flow control functions
Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
Cont-1
X
X
X
X
0
1
0
1
1
1
Rev. 04 — 19 June 2003
Description
Special Character Detect.
Enhanced function control bit. The content of IER[7-4], ISR[5-4],
FCR[5-4], and MCR[7-5] can be modified and latched. After modifying
any bits in the enhanced registers, EFR[4] can be set to a logic 0 to latch
the new values. This feature prevents existing software from altering or
overwriting the SC16C554/554D enhanced functions.
Cont-3-0 Tx, Rx control. Logic 0 or cleared is the default condition.
Combinations of software flow control can be selected by programming
these bits. See
Logic 0 = Special character detect disabled (normal default condition).
Logic 1 = Special character detect enabled. The SC16C554/554D
compares each incoming receive character with Xoff2 data. If a match
exists, the received data will be transferred to FIFO and ISR[4] will be
set to indicate detection of special character. Bit-0 in the X-registers
corresponds with the LSB bit for the receive character. When this
feature is enabled, the normal software flow control must be disabled
(EFR[3-0] must be set to a logic 0).
Logic 0 = Disable (normal default condition).
Logic 1 = Enable.
Cont-0
X
X
X
X
0
0
1
1
1
1
Table
TX, RX software flow controls
No transmit flow control
Transmit Xon1/Xoff1
Transmit Xon2/Xoff2
Transmit Xon1 and Xon2/Xoff1 and Xoff2
No receive flow control
Receiver compares Xon1/Xoff1
Receiver compares Xon2/Xoff2
Transmit Xon1/Xoff1
Receiver compares Xon1 and Xon2, Xoff1 and Xoff2
Transmit Xon2/Xoff2
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
Transmit Xon1 and Xon2/Xoff1 and Xoff2
Receiver compares Xon1 and Xon2/Xoff1 and Xoff2
22.
[1]
SC16C554/554D
…continued
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
33 of 53