SAM9G10 Atmel Corporation, SAM9G10 Datasheet - Page 135

no-image

SAM9G10

Manufacturer Part Number
SAM9G10
Description
Manufacturer
Atmel Corporation
Datasheets

Specifications of SAM9G10

Flash (kbytes)
0 Kbytes
Pin Count
217
Max. Operating Frequency
266 MHz
Cpu
ARM926
Hardware Qtouch Acquisition
No
Max I/o Pins
96
Ext Interrupts
96
Usb Transceiver
3
Usb Speed
Full Speed
Usb Interface
Host, Device
Spi
2
Twi (i2c)
1
Uart
4
Ssc
3
Sd / Emmc
1
Graphic Lcd
Yes
Video Decoder
No
Camera Interface
No
Resistive Touch Screen
No
Temp. Sensor
No
Crypto Engine
No
Sram (kbytes)
16
Self Program Memory
NO
External Bus Interface
1
Dram Memory
sdram
Nand Interface
Yes
Picopower
No
Temp. Range (deg C)
-40 to 85
I/o Supply Class
1.8/3.3
Operating Voltage (vcc)
1.08 to 1.32
Fpu
No
Mpu / Mmu
No/Yes
Timers
3
Output Compare Channels
3
Input Capture Channels
3
32khz Rtc
Yes
Calibrated Rc Oscillator
No
21. External Bus Interface (EBI)
21.1
6462B–ATARM–6-Sep-11
Overview
The External Bus Interface (EBI) is designed to ensure the successful data transfer between
several external devices and the embedded Memory Controller of an ARM-based device. The
Static Memory and SDRAM Controllers are all featured external Memory Controllers on the EBI.
These external Memory Controllers are capable of handling several types of external memory
and peripheral devices, such as SRAM, PROM, EPROM, EEPROM, Flash, and SDRAM.
The EBI also supports the CompactFlash and the NAND Flash protocols via integrated circuitry
that greatly reduces the requirements for external components. Furthermore, the EBI handles
data transfers with up to eight external devices, each assigned to eight address spaces defined
by the embedded Memory Controller. Data transfers are performed through a 16-bit or 32-bit
data bus, an address bus of up to 26 bits, up to eight chip select lines (NCS[7:0]) and several
control pins that are generally multiplexed between the different external Memory Controllers.
SAM9G10
135

Related parts for SAM9G10