SAM9G20 Atmel Corporation, SAM9G20 Datasheet - Page 547

• Manufacturer Part Number: SAM9G20
• Manufacturer: Atmel Corporation

Specifications of SAM9G20

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 7
• Ssc: 1
• Ethernet: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 4
• Adc Resolution (bits): 10
• Adc Speed (ksps): 95
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

33.8.13
Name:
Access Type:
• TXRDY: Transmit Ready
0 = Data has been loaded in SSC_THR and is waiting to be loaded in the Transmit Shift Register (TSR).
1 = SSC_THR is empty.
• TXEMPTY: Transmit Empty
0 = Data remains in SSC_THR or is currently transmitted from TSR.
1 = Last data written in SSC_THR has been loaded in TSR and last data loaded in TSR has been transmitted.
• ENDTX: End of Transmission
0 = The register SSC_TCR has not reached 0 since the last write in SSC_TCR or SSC_TNCR.
1 = The register SSC_TCR has reached 0 since the last write in SSC_TCR or SSC_TNCR.
• TXBUFE: Transmit Buffer Empty
0 = SSC_TCR or SSC_TNCR have a value other than 0.
1 = Both SSC_TCR and SSC_TNCR have a value of 0.
• RXRDY: Receive Ready
0 = SSC_RHR is empty.
1 = Data has been received and loaded in SSC_RHR.
• OVRUN: Receive Overrun
0 = No data has been loaded in SSC_RHR while previous data has not been read since the last read of the Status
Register.
1 = Data has been loaded in SSC_RHR while previous data has not yet been read since the last read of the Status
Register.
• ENDRX: End of Reception
0 = Data is written on the Receive Counter Register or Receive Next Counter Register.
1 = End of PDC transfer when Receive Counter Register has arrived at zero.
6384E–ATARM–05-Feb-10
RXBUFF
31
23
15
–
–
–
7
SSC Status Register
ENDRX
30
22
14
SSC_SR
Read-only
–
–
–
6
OVRUN
29
21
13
–
–
–
5
RXRDY
28
20
12
–
–
–
4
TXBUFE
RXSYN
27
19
11
–
–
3
TXSYN
ENDTX
26
18
10
–
–
2
AT91SAM9G20
TXEMPTY
RXEN
CP1
25
17
–
9
1
TXRDY
TXEN
CP0
24
16
–
8
0
547