AD7904 Analog Devices, AD7904 Datasheet - Page 16
![no-image](/images/manufacturer_photos/0/0/56/analog_devices_sml.jpg)
AD7904
Manufacturer Part Number
AD7904
Description
4-Channel, 1 MSPS, 8-Bit A/D Converter with Sequencer in 16-Lead TSSOP
Manufacturer
Analog Devices
Datasheet
1.AD7904.pdf
(32 pages)
Specifications of AD7904
Resolution (bits)
8bit
# Chan
4
Sample Rate
1MSPS
Interface
Ser,SPI
Analog Input Type
SE-Uni
Ain Range
Uni (Vref),Uni (Vref) x 2
Adc Architecture
SAR
Pkg Type
SOP
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AD7904BRU
Manufacturer:
ADI/亚德诺
Quantity:
20 000
Company:
Part Number:
AD7904BRUZ
Manufacturer:
ADI
Quantity:
1 000
Part Number:
AD7904BRUZ
Manufacturer:
ADI/亚德诺
Quantity:
20 000
Company:
Part Number:
AD7904BRUZ-REEL
Manufacturer:
RONM
Quantity:
10 720
Company:
Part Number:
AD7904BRUZ-REEL7
Manufacturer:
ADI
Quantity:
1 000
AD7904/AD7914/AD7924
SEQUENCER OPERATION
The SEQ1 and SEQ0 bits in the control register allow the user to
select a mode of operation for the sequencer function. Table 10
outlines the three modes of operation of the sequencer.
Figure 11 shows the traditional operation of a multichannel
ADC, where each serial transfer selects the next channel for
conversion. In this mode of operation, the sequencer function
is not used.
Table 10. Sequence Selection
SEQ1
0
1
1
SEQ0
X
0
1
Sequencer Function
Not used
Used (not interrupted
upon completion)
Continuous
conversions
CS
CS
Description
The sequencer function is not used. The analog input channel selected for each individual
conversion is determined by the contents of the channel address bits, ADD1 and ADD0, in each
previous write operation. This mode of operation reflects the traditional operation of a multi-
channel ADC, without using the sequencer function, where each write to the AD7904/AD7914/
AD7924 selects the next channel for conversion (see Figure 11).
The sequencer function is not interrupted upon completion of the write operation. This config-
uration allows other bits in the control register to be altered between conversions while in a
sequence without terminating the cycle.
This configuration is used in conjunction with the channel address bits, ADD1 and ADD0, to
program continuous conversions on a consecutive sequence of channels from Channel 0 to a
selected final channel that is specified by the channel address bits in the control register (see
Figure 12).
DIN: WRITE TO CONTROL REGISTER,
WRITE BIT = 1,
SELECT CODING, RANGE, AND POWER MODE.
SELECT CHANNEL ADD1, ADD0 FOR CONVERSION.
SEQ1 = 0, SEQ0 = x
DOUT: CONVERSION RESULT FROM PREVIOUSLY
SELECTED CHANNEL ADD1, ADD0
DIN: WRITE TO CONTROL REGISTER,
WRITE BIT = 1,
SELECT CODING, RANGE, AND POWER MODE.
SELECT ADD1, ADD0 FOR CONVERSION.
SEQ1 = 0, SEQ0 = x
Figure 11. SEQ1 Bit = 0, SEQ0 Bit = x Flowchart
DUMMY CONVERSION
Rev. B | Page 16 of 32
POWER ON
Figure 12 shows how to program the AD7904/AD7914/AD7924
to continuously convert on a sequence of consecutive channels
from Channel 0 to a selected final channel. To exit this mode of
operation and revert to the traditional mode of operation of a
multichannel ADC (as shown in Figure 11), ensure that the
WRITE bit = 1 and SEQ1 = SEQ0 = 0 on the next serial transfer.
WRITE BIT = 1,
SEQ1 = 0, SEQ0 = x