AD7472 Analog Devices, AD7472 Datasheet - Page 8

• Manufacturer Part Number: AD7472
• Description: 12-Bit, 2.7 V to 5.25 V, 1.5 MSPS Low Power ADC
• Manufacturer: Analog Devices

Specifications of AD7472

• Resolution (bits): 12bit
• # Chan: 1
• Sample Rate: 1.5MSPS
• Interface: Par
• Analog Input Type: SE-Uni
• Ain Range: Uni (Vref)
• Adc Architecture: SAR
• Pkg Type: SOIC,SOP

AD7470/AD7472
Mnemonic
DGND
V
V
DB0–DB9/11
IN
DRIVE
Function
Digital Ground. This is the ground reference point for all digital circuitry on the AD7470 and AD7472. The
DGND and AGND voltages should ideally be at the same potential and must not be more than 0.3 V apart even
on a transient basis.
Analog Input. Single-ended analog input channel. The input range is 0 V to REF IN. The analog input presents a
high dc input impedance.
Supply Voltage for the Output Drivers, 2.7 V to 5.25 V. This voltage determines the output high voltage for the
data output pins. It allows AV
(ADC), while the digital outputs can interface to 3 V logic.
Data Bit 0 to Data Bit 9 (AD7470) and DB11 (AD7472). Parallel digital outputs that provide the conversion result
for the part. These are three-state outputs that are controlled by CS and RD. The output high voltage level for these
outputs is determined by the V
PIN FUNCTION DESCRIPTIONS (continued)
DD
DRIVE
and DV
input.
DD
to operate at 5 V (and maximize the dynamic performance of the
–8–
REV. B