ST72361J6 STMicroelectronics, ST72361J6 Datasheet - Page 64

• Manufacturer Part Number: ST72361J6
• Description: 8-bit MCU
• Manufacturer: STMicroelectronics

Specifications of ST72361J6

• Hdflash Endurance: 100 cycles, data retention 40 years at 85°C
• 5 Power Saving Modes: Halt, Auto Wake Up From Halt, Active Halt, Wait and Slow

ST72361
PWM AUTO-RELOAD TIMER (Cont’d)
Output compare and Time base interrupt
On overflow, the OVF flag of the ARTCSR register
is set and an overflow interrupt request is generat-
ed if the overflow interrupt enable bit, OIE, in the
ARTCSR register, is set. The OVF flag must be re-
set by the user software. This interrupt can be
used as a time base in the application.
Figure 44. External Event Detector Example (3 counts)
64/225
f
EXT
COUNTER
=f
COUNTER
OVF
FDh
FEh
ARTARR=FDh
FFh
INTERRUPT
IF OIE=1
FDh
External clock and event detector mode
Using the f
auto-reload timer can be used as an external clock
event detector. In this mode, the ARTARR register
is used to select the n
be counted before setting the OVF flag.
n
Caution: The external clock function is not availa-
ble in HALT mode. If HALT mode is used in the ap-
plication, prior to executing the HALT instruction,
the counter must be disabled by clearing the TCE
bit in the ARTCSR register to avoid spurious coun-
ter increments.
ARTCSR READ
EVENT
FEh
= 256 - ARTARR
EXT
FFh
external prescaler input clock, the
INTERRUPT
IF OIE=1
EVENT
FDh
ARTCSR READ
number of events to
t