TMP86xy46NG Toshiba, TMP86xy46NG Datasheet - Page 154

• Manufacturer Part Number: TMP86xy46NG
• Manufacturer: Toshiba

Specifications of TMP86xy46NG

• Package: SDIP42
• Rom Types (m=mask,p=otp,f=flash): M/P/F
• Rom Size: 8/16/32
• Ram Size: 512/512/1K
• Driver Led: 19
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: -
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 8
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 1
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 33
• Power Supply (v): 4.5 to 5.5

Table 14-1 Pin name in PROM mode
14.1.2 PROM mode
14.1.1.3 Input/Output Circuiry
(PROM mode)
XIN (CLK)
A15 to A8
Pin name
D7 to D0
A7 to A0
RESET
XOUT
VCC
GND
VCC
GND
PGM
VPP
CE
OE
ure 14-2. The programming and verification for the internal PROM is acheived by using a general-purpose
PROM programmer with the adaptor socket.
The PROM mode is set by setting the
Note 1: The high-speed program mode can be used. The setting is different according to the type of PROM pro-
Note 2: No pin is applied to A16 pin of TC571000D/AD(Open) in PROM mode.
Always set the adapter socket switch to the "N" side when using TOSHIBA’s adaptor socket.
grammer to use, refer to each description of PROM programmer.
TMP86PM46NG does not support the electric signature mode, apply the ROM type of PROM programmer
to TC571000D/AD.
1. Control pins
2. I/O ports
Power supply
Power supply
Power supply
Input/Output
Setting pin
Setting pin
Setting pin
that the TEST pin does not have a built-in pull-down resistor.
TMP86CM46A.
Output
Input
Input
Input
Input
Input
Input
The control pins of the TMP86PM46NG are the same as those of the TMP86CM46A except
The I/O circuitries of the TMP86PM46NG I/O ports are the same as those of the
I/O
In case of external CLK input, set CLK to XIN
+12.75V/5V (Power supply of program)
Program memory data input/output
Program memory address input
Program memory address input
Fix to "H" level in PROM mode
Fix to "L" level in PROM mode
Fix to "L" level in PROM mode
Set oscillation with resonator
Program mode signal input
Output enable signal input
Chip enable signal input
and set XOUT to open.
RESET
+6.25V/5V
Function
Page 143
0V
pin, TEST pin and other pins as shown in Table 14-1 and Fig-
AVSS,VAREF,P10,P12,P20,P22
AVDD,P11,P21
(MCU mode)
P07 to P00
P37 to P30
P47 to P40
Pin name
RESET
XOUT
TEST
VDD
VSS
P13
P14
P15
XIN
TMP86PM46NG