IDT82V2044E Integrated Device Technology, IDT82V2044E Datasheet - Page 29
![no-image](/images/no-image-200.jpg)
IDT82V2044E
Manufacturer Part Number
IDT82V2044E
Description
4 Channel T1/j1/e1 Short Haul Liu
Manufacturer
Integrated Device Technology
Datasheet
1.IDT82V2044E.pdf
(73 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
IDT82V2044EPF
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
Company:
Part Number:
IDT82V2044EPF8
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
Company:
Part Number:
IDT82V2044EPFG
Manufacturer:
BOSANHITE
Quantity:
462
Company:
Part Number:
IDT82V2044EPFG
Manufacturer:
IDT
Quantity:
353
Company:
Part Number:
IDT82V2044EPFG
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
Company:
Part Number:
IDT82V2044EPFG8
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
QUAD CHANNEL T1/E1/J1 SHORT HAUL LINE INTERFACE UNIT
received errors when the CNT_MD bit (MAINT6, 10H...) is set to ‘0’. When
there is a ‘0’ to ‘1’ transition on the CNT_TRF bit (MAINT6, 10H...), the data
in the counter will be transferred to (CNT0, 18H...) and (CNT1, 19H...), then
the counter will be reset. The errors occurred during the transfer will be
accumulated to the next round. If the counter overflows, a counter overflow
interrupt indicated by CNT_OV_IS bit (INTS1, 17H...) will be generated if
it is not masked by CNT_IM bit (INTM1, 12H...).
Note: 1. It is recommended that users should do the followings within next round
• Manual Report Mode
In Manual Report Mode, the internal Error Counter starts to count the
of error counting: Read the data in CNT0 and CNT1; Reset CNT_TRF
bit for the next ‘0’ to ‘1’ transition on this bit.
Figure-18 Manual Report Mode
N
CNT0, CNT1
counter
counter
CNT1 within next round
Reset CNT_TRF for the
Read the data in CNT0,
Manual Report mode
next '0' to '1' transition
A '0' to '1' transition
on CNT_TRF?
(CNT_MD=0)
counting
0
Y
data in
1
same process
next round
repeat the
29
3.8.3
stream, will a ‘0’ to ‘1’ transition on the BPV_INS bit (MAINT6, 10H...) gen-
erate a bipolar violation pulse, and the polarity of the second ‘1’ in the series
will be inverted.
a logic error during the PRBS/QRSS transmission.
3.9
DFM_OFF bit (TCF1, 03H...). If the transmit driver failure monitor is
enabled, the transmit driver failure will be captured by DF_S bit (STAT0,
14H...). The transition of the DF_S bit is reflected by DF_IS bit (INTS0,
16H...), and, if enabled by DF_IM bit (INTM0, 11H...), will generate an inter-
rupt. When there is a short circuit on the TTIPn/TRINGn port, the output cur-
rent will be limited to 100 mA (typical) and an interrupt will be generated.
Only when three consecutive ‘1’s are detected in the transmit data
A ‘0’ to ‘1’ transition on the EER_INS bit (MAINT6, 10H...) will generate
The transmit driver failure monitor can be enabled or disabled by setting
BIPOLAR VIOLATION AND PRBS ERROR INSERTION
LINE DRIVER FAILURE MONITORING
TEMPERATURE RANGES
INDUSTRIAL