dp83848qsqx/nopb National Semiconductor Corporation, dp83848qsqx/nopb Datasheet - Page 43

• Manufacturer Part Number: dp83848qsqx/nopb
• Description: Phyter Extended Temperature Single Port 10/100 Mb/s Ethernet Physical Layer Transceiver
• Manufacturer: National Semiconductor Corporation

Bit
4
3
2
1
0
AUTO-NEG COMPLETE
LOOPBACK STATUS
DUPLEX STATUS
SPEED STATUS
LINK STATUS
Bit Name
Default
0, RO
0, RO
0, RO
0, RO
0, RO
Auto-Negotiation Complete:
1 = Auto-Negotiation complete.
0 = Auto-Negotiation not complete.
Loopback:
1 = Loopback enabled.
0 = Normal operation.
Duplex:
This bit indicates duplex status and is determined from Auto-Negotiation or
Forced Modes.
1 = Full duplex mode.
0 = Half duplex mode.
Note: This bit is only valid if Auto-Negotiation is enabled and complete and
there is a valid link or if Auto-Negotiation is disabled and there is a valid link.
Speed10:
This bit indicates the status of the speed and is determined from Auto-
Negotiation or Forced Modes.
1 = 10 Mb/s mode.
0 = 100 Mb/s mode.
Note: This bit is only valid if Auto-Negotiation is enabled and complete and
there is a valid link or if Auto-Negotiation is disabled and there is a valid link.
Link Status:
This bit is a duplicate of the Link Status bit in the BMSR register, except that
it will not be cleared upon a read of the PHYSTS register.
1 = Valid link established (for either 10 or 100 Mb/s operation).
0 = Link not established.
43
Description
www.national.com