mc9s08jm60 Freescale Semiconductor, Inc, mc9s08jm60 Datasheet - Page 188

• Manufacturer Part Number: mc9s08jm60
• Description: Hcs08 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

Multi-Purpose Clock Generator (S08MCGV1)
12.3.5
188
OSCINIT
FTRIM
LOLIE
Field
Field
PLLS
1
0
7
6
Reset:
W
R
MCG Control Register 3 (MCGC3)
OSC Initialization — If the external reference clock is selected by ERCLKEN or by the MCG being in FEE, FBE,
PEE, PBE, or BLPE mode, and if EREFS is set, then this bit is set after the initialization cycles of the external
oscillator clock have completed. This bit is only cleared when either EREFS is cleared or when the MCG is in
either FEI, FBI, or BLPI mode and ERCLKEN is cleared.
MCG Fine Trim — Controls the smallest adjustment of the internal reference clock frequency. Setting FTRIM will
increase the period and clearing FTRIM will decrease the period by the smallest amount possible.
If an FTRIM value stored in nonvolatile memory is to be used, it’s the user’s responsibility to copy that value from
the nonvolatile memory location to this register’s FTRIM bit.
Loss of Lock Interrupt Enable — Determines if an interrupt request is made following a loss of lock indication.
The LOLIE bit only has an effect when LOLS is set.
0 No request on loss of lock.
1 Generate an interrupt request on loss of lock.
PLL Select — Controls whether the PLL or FLL is selected. If the PLLS bit is clear, the PLL is disabled in all
modes. If the PLLS is set, the FLL is disabled in all modes.
1 PLL is selected
0 FLL is selected
Table 12-4. MCG Status and Control Register Field Descriptions (continued)
LOLIE
7
0
PLLS
Table 12-5. MCG PLL Register Field Descriptions
0
6
Figure 12-7. MCG PLL Register (MCGPLL)
MC9S08JM60 Series Data Sheet, Rev. 2
CME
0
5
0
0
4
Description
Description
0
3
0
2
VDIV
Freescale Semiconductor
0
1
1
0