wm9081 Wolfson Microelectronics plc, wm9081 Datasheet - Page 6

no-image

wm9081

Manufacturer Part Number
wm9081
Description
Mono Dac With 2.6w Class Ab/d Speaker Driver, Dynamic Range Controller And Retune Mobile Parametric Equalizer
Manufacturer
Wolfson Microelectronics plc
Datasheet
PARAMETER
Digital supply range (Core)
Digital supply range (Buffer)
Analogue supplies range
Speaker supply range
Ground
Ambient temperature, T
Junction temperature, T
WM9081
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously
operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given
under Electrical Characteristics at the test conditions specified.
Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
The Moisture Sensitivity Level for each package type is specified in Ordering Information.
Supply voltages (excluding SPKVDD)
SPKVDD
Voltage range digital inputs
Voltage range analogue inputs
Junction temperature, T
Storage temperature after soldering
Notes
1.
RECOMMENDED OPERATING CONDITIONS
Notes
1.
2.
3.
4.
5.
6.
w
ABSOLUTE MAXIMUM RATINGS
Analogue, digital and speaker grounds must always be within 0.3V of each other.
All digital and analogue supplies are completely independent from each other (i.e. not internally connected).
DCVDD must be less than or equal to AVDD.
DCVDD must be less than or equal to DBVDD.
AVDD must be less than or equal to SPKVDD.
SPKVDD must be high enough to support the peak output voltage when using DCGAIN and ACGAIN functions, to
avoid output waveform clipping.
Junction temperature is a function of ambient temperature and of the device operating conditions. The ambient
temperature limits and the junction temperature limits must both be observed. See “Thermal Characteristics”.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible
to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage
of this device.
A
J
J
CONDITION
DGND, AGND, SPKGND
SYMBOL
SPKVDD
DCVDD
DBVDD
AVDD
1.71
1.71
MIN
2.7
2.7
-40
-40
DGND -0.3V
AGND -0.3V
-40ºC
-65ºC
-0.3V
-0.3V
MIN
TYP
1.8
1.8
3.3
5.0
0
MAX
+125
+85
3.6
3.6
3.6
5.5
PP, Rev 3.0, April 2009
DBVDD +0.3V
AVDD +0.3V
+150ºC
+150ºC
+4.5V
MAX
+7V
Pre-Production
UNIT
ºC
ºC
V
V
V
V
V
6

Related parts for wm9081