lxt975 Intel Corporation, lxt975 Datasheet - Page 20

no-image

lxt975

Manufacturer Part Number
lxt975
Description
Fast Ethernet 10/100 Quad Transceivers
Manufacturer
Intel Corporation
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
lxt975AHC
Manufacturer:
LEVELONE
Quantity:
3
Part Number:
lxt975AHC
Manufacturer:
LEVEL
Quantity:
20 000
Part Number:
lxt975ALC
Manufacturer:
ALTERA
0
Part Number:
lxt975BHC
Manufacturer:
ALLEGRO
Quantity:
1 439
Part Number:
lxt975BHC
Manufacturer:
LEVELONE/INT
Quantity:
1 000
LXT974/LXT975 — Fast Ethernet 10/100 Quad Transceivers
2.2
2.2.1
2.2.1.1
20
Figure 5. LXT975 Switch Application
Network Media / Protocol Support
The LXT974/975 supports both 10BASE-T and 100BASE-TX Ethernet over twisted-pair, or 100
Mbps Ethernet over fiber media (100BASE-FX). A Media Independent Interface (MII) is used for
communication with the Media Access Controller (MAC).
10/100 Mbps Network Interface
Each of the four network interface ports consists of four external pins (two differential signal
pairs). The pins are shared between twisted-pair (TP) and fiber. Signal assignments (input or
output, positive or negative) vary depending on whether the port is configured for TP or fiber
media. Refer to
The LXT974/975 output drivers generate either 100BASE-TX, 10BASE-T, or 100BASE-FX
output. When not transmitting data, the LXT974/975 generates 802.3-compliant link pulses or idle
code. Input signals are decoded either as a 100BASE-TX, 100BASE-FX, or 10BASE-T input,
depending on the mode selected. Auto-negotiation/parallel detection or manual control is used to
determine the speed of this interface.
Twisted-Pair Interface
When operating at 100 Mbps, MLT3 symbols are continuously transmitted and received. When not
transmitting data, the LXT974/975 generates “IDLE” symbols.
During 10 Mbps operation, Manchester-encoded data is exchanged. When no data is being
exchanged, the line is left in an idle state.
In 100 Mbps mode, the LXT974/975 is capable of driving a 100BASE-TX connection over 100 Ω,
Category 5, Unshielded Twisted Pair (UTP). A 10BASE-T connection can be supported using
100 Ω Category 3, UTP.
Module
Module
Module
Module
Fiber
Fiber
Fiber
Fiber
10/100 Quad
Transceiver
LXT975
Transformer
Quad Transceiver
QUAD
LXT974
10/100
Table 1
10/100 Quad
Transceiver
Transformer
LXT975
QUAD
through
10 or 100 Mbps
Stacked RJ-45
Backplane
MAC ASIC
Switch
10/100 Quad
Transceiver
Transformer
Table 6
LXT975
QUAD
Memory
for specific pin assignments.
10/100 Quad
Transceiver
Transformer
LXT975
QUAD
Datasheet

Related parts for lxt975