ssd1329 ETC-unknow, ssd1329 Datasheet - Page 43

• Manufacturer Part Number: ssd1329
• Description: 128 X 128 Oled Segment / Common Driver With Controller Equips With 16 Gray Scale Levels And 64 Hard Icon Lines
• Manufacturer: ETC-unknow

10.23 Set Second Pre-charge period (BBh)
This double byte command is used to set the phase 3 second pre-charge period. The period of phase 3 can be
programmed by command BBh and it is ranged from 0 to 15 DCLK's. Please refer to Table 9-1 : Command
Table for the details of setting.
10.24 Set First Pre-charge voltage, V
This double byte command is used to set phase 2 first pre-charge voltage level. It can be programmed to set
the first pre-charge voltage reference to V
breakdown levels of each step.
10.25 Set V
This double byte command sets the high voltage level of common pins, V
programmed with reference to V
each step.
10.26 No Operation (E3h)
This is a no operation command.
10.27 Set Command Lock (FDh)
This command is used to lock the MCU from accepting any command.
SSD1329
Pulse
Width
Gray scale
table setting
COMH
Rev 1.1
Gray Scale
(BEh)
Figure 10-14 : Example of gamma correction by gray scale table setting
P 43/58
CC
Brightness
. Please refer to Table 9-1 for detail information and breakdown levels of
Dec 2005
P
CC
(BCh)
or V
COMH
Panel
response
Pulse width
. Please refer to Table 9-1 for detail information and
Brightness
COMH
. The level of V
Result in linear
response
Gray Scale
Solomon Systech
COMH
is