S29CD016G SPANSION, S29CD016G Datasheet - Page 89

• Manufacturer Part Number: S29CD016G
• Description: 16 Megabit (512 K x 32-Bit) CMOS 2.5 Volt-only Burst Mode / Dual Boot / Simultaneous Read/Write Flash Memory
• Manufacturer: SPANSION

A d v a n c e
I n f o r m a t i o n
Configuration Register
Table 9: CR14 reserve bit assigned ASD.
Table 9: Speed options changed.
Table 10: CR14 reserve changed to ASD.
Table12. Sector Addresses for Ordering Option 00
Bank changed to 0.
Bank changed to 1.
Table 13. Sector Addresses for Ordering Option 01
Bank changed to 0.
Bank changed to 1.
Table 16. Device Geometry Definition
0005 = supports x16 and x32 via WORD#...” Removed.
Unlock Bypass Command Sequence
Table “18” replaced with “19” in text.
Table 19. Memory Array Command Definitions (x32 Mode)
Autoselect (7) - Device ID (11); Fifth/Data changed to “36”.
Table 20. Sector Protection Command Definitions (x32 Mode)
PBB Status (11,12) Third/Addr changed to “SG”. PPB Lock Bit Status; Third/Addr
“BA” removed. DYB Status; Third/Addr changed to “SA”.
Absolute Maximum Ratings
Address, Data... changed to 3.6v.
Table 22 CMOS Compatible
Input High Voltage Max changed to 3.6. RY/BY#, OUtput Low Current Min re-
moved, Max added (8).
Table 23. Test Specifications
Test conditions changed to OJ,OM,OP.
AC Characteristics
Figure 14 updated RESET#.
Table number 24. Asynchronous Read Operations
OM speed options; Output Enable to Output Delay “20” added.
Table 26. Hardware Reset
Last row deleted.
Erase/Program Operations
TWADVH row added. TWCKS row added.
Table 27. Alternate CE# Controlled Erase/Program Operations
TWPH row added, TWADVH row added, TWCKS row added.
Physical Dimensions
Latchup characteristics deleted.
Pin Description
“WAIT# Provides data valid feedback only when the burst length is set to
continuous.” Removed from document.
November 5, 2004 S29CD016_00_A4
S29CD016G
89