S29GL128S SPANSION [SPANSION], S29GL128S Datasheet - Page 13

• Manufacturer Part Number: S29GL128S
• Manufacturer: SPANSION [SPANSION]

2.1
March 16, 2012 S29GL_128S_01GS_00_06
Flash Memory Array
While in EA mode, only the Program / Erase suspend command or the Status Register Read command will
be accepted. All other commands are ignored. Thus, no other ASO may be entered from the EA mode.
When an Embedded Algorithm is suspended, the Data Polling ASO is visible until the device has suspended
the EA. When the EA is suspended the Data Polling ASO is exited and Flash Array data is available. The
Data Polling ASO is reentered when the suspended EA is resumed, until the EA is again suspended or
finished. When an Embedded Algorithm is completed, the Data Polling ASO is exited and the device goes to
the previous (calling) mode (from which the Embedded Algorithm was started).
In ASO mode, one of the remaining overlay address spaces is entered (overlaid on the main Flash Array
address map). Only one ASO may be entered at any one time. Commands to the device affect the currently
entered ASO. Only certain commands are valid for each ASO. These are listed in the
in each ASO related section of the table.
The following ASOs have non-volatile data that may be programmed to change 1’s to 0’s:
 Secure Silicon Region
 Lock Register
 Persistent Protection Bits (PPB)
 Password
 Only the PPB ASO has non-volatile data that may be erased to change 0’s to 1’s
When a program or erase command is issued while one of the non-volatile ASOs is entered, the EA operates
on the ASO. The ASO is not readable while the EA is active. When the EA is completed the ASO remains
entered and is again readable. Suspend and Resume commands are ignored during an EA operating on any
of these ASOs.
The S29GL-S family has uniform sector architecture with a sector size of 128 kB.
shows the sector architecture of the four devices.
Sector Size (kbyte)
Sector Size (kbyte)
Sector Size (kbyte)
128
128
128
D a t a
Table 2.1 S29GL01GS Sector and Memory Address Map
Table 2.2 S29GL512S Sector and Memory Address Map
Table 2.3 S29GL256S Sector and Memory Address Map
Sector Count
Sector Count
Sector Count
1024
512
256
GL-S MirrorBit
S h e e t
®
Sector Range
Sector Range
Sector Range
Family
SA1023
SA511
SA255
SA00
SA00
SA00
:
:
:
3FF0000h-3FFFFFFh
1FF0000h-1FFFFFFh
0FF0000h-0FFFFFFh
0000000h-000FFFFh
0000000h-000FFFFh
0000000h-000FFFFh
Address Range
Address Range
Address Range
(16-Bit)
(16-Bit)
(16-Bit)
:
:
:
Table 2.1
Table 6.1 on page
Sector Starting Address
Sector Starting Address
Sector Starting Address
Sector Ending Address
Sector Ending Address
Sector Ending Address
to
Table 2.4
Notes
Notes
Notes
–
–
–
57,
13