MC9S12P32MFT Freescale Semiconductor, MC9S12P32MFT Datasheet - Page 468

• Manufacturer Part Number: MC9S12P32MFT
• Description: 16-bit Microcontrollers - MCU 16 BIT 32K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of MC9S12P32MFT

• Rohs: yes
• Core: S12
• Processor Series: MC9S12P
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 32 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: QFN-48
• Mounting Style: SMD/SMT

128 KByte Flash Module (S12FTMRC128K1V1)
Upon clearing CCIF to launch the Program D-Flash command, the user-supplied words will be transferred
to the Memory Controller and be programmed if the area is unprotected. The CCOBIX index value at
Program D-Flash command launch determines how many words will be programmed in the D-Flash block.
The CCIF flag is set when the operation has completed.
13.4.5.16 Erase D-Flash Sector Command
The Erase D-Flash Sector operation will erase all addresses in a sector of the D-Flash block.
Upon clearing CCIF to launch the Erase D-Flash Sector command, the Memory Controller will erase the
selected Flash sector and verify that it is erased. The CCIF flag will set after the Erase D-Flash Sector
operation has completed.
468
Register
FSTAT
CCOBIX[2:0]
Table 13-63. Erase D-Flash Sector Command FCCOB Requirements
CCOBIX[2:0]
Table 13-61. Program D-Flash Command FCCOB Requirements
MGSTAT1
MGSTAT0
ACCERR
Error Bit
FPVIOL
000
001
101
Table 13-62. Program D-Flash Command Error Handling
Global address [15:0] anywhere within the sector to be erased.
S12P-Family Reference Manual, Rev. 1.13
Set if CCOBIX[2:0] < 010 at command launch
Set if CCOBIX[2:0] > 101 at command launch
Set if command not available in current mode (see
Set if an invalid global address [17:0] is supplied
Set if a misaligned word address is supplied (global address [0] != 0)
Set if the requested group of words breaches the end of the D-Flash block
Set if the selected area of the D-Flash memory is protected
Set if any errors have been encountered during the verify operation
Set if any non-correctable errors have been encountered during the verify
operation
See
0x12
Section 13.1.2.2
Word 3 program value, if desired
FCCOB Parameters
FCCOB Parameters
Global address [17:16] to identify
for D-Flash sector size.
Error Condition
D-Flash block
Table
13-27)
Freescale Semiconductor