EV-ADF41020EB1Z Analog Devices, EV-ADF41020EB1Z Datasheet - Page 3

• Manufacturer Part Number: EV-ADF41020EB1Z
• Description: Clock & Timer Development Tools Evaluation Board
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF41020EB1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF41020
• Frequency: 18 GHz
• Operating Supply Voltage: 5.5 V, 15 V
• Interface Type: USB
• Operating Supply Current: 30 mA
• Factory Pack Quantity: 1

Evaluation Board User Guide
QUICK START GUIDE
Use the following steps to evaluate the
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Update all registers.
11. Connect the EXT_VCOOUT output to a signal source analyzer.
12. Measure the results.
Install the Int-N software.
Follow the hardware driver installation procedure.
Connect the power supplies to the EV-ADF41020EB1Z:
Connect the USB cable to the PC and to the EV-ADF41020EB1Z.
Run the Int-N software.
Select the
Ensure that the message Board connected appears on front panel.
Click the Main Controls tab to input RF settings and settings.
Note that the Phase Detector Polarity drop-down list in the Settings section should be set to Negative to suit the active loop filter in
inverting mode.
a.
b.
The 5.5 V power supply to the on-board banana connectors.
The 15 V power supply to test points labeled +15V and AGND.
ADF41020
device and the USB board in the Select Device and Connection tab of the software front panel window.
ADF41020
device:
Rev. 0 | Page 3 of 20
UG-405