EV-ADF4153SD1Z Analog Devices, EV-ADF4153SD1Z Datasheet - Page 5

• Manufacturer Part Number: EV-ADF4153SD1Z
• Description: Clock & Timer Development Tools Evaluation Board I.C.
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF4153SD1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF4153
• Frequency: 4 GHz
• Operating Supply Voltage: 6 V to 12 V
• Operating Supply Current: 20 mA
• Factory Pack Quantity: 1
• For Use With: EVAL-SDP-CS1Z

Evaluation Board User Guide
DEFAULT OPERATION AND JUMPER SELECTION
SETTINGS
Link positions are outlined in Table 1.
Table 1. Link Positions and Functions
Link
LK1
LK2
LK3 (V
LK4 (V
LK5 (V
DD
VCO
P
)
)
)
Position
A
B
A
B
A
B
A
B
A
B
Options
R1A
RSET
GND
VDD
5 V
3 V
5 V
3 V
5 V
3 V
Description
Not used
Normal operation
Not used
Normal operation
Not used
Normal operation
VCO supply (5 V)
VCO supply (3 V)
V
V
P
P
supply (5 V)
supply (3 V)
Rev. A | Page 5 of 24
SYSTEM DEMONSTRATION PLATFORM (SDP)
The system demonstration platform (SDP) is a series of control-
ler boards, interposer boards, and daughter boards that can be
used for easy low cost evaluation of Analog Devices, Inc.,
components and reference circuits. It is a reusable platform
whereby a single controller board can be reused in various
daughter board evaluation systems.
Controller boards connect to the PC via USB 2.0 and provide a
range of communication interfaces on a 120-pin connector.
The pinout for this connector is strictly defined. This 120-pin
connector’s receptacle is on all SDP daughter boards, compo-
nent evaluation boards, and Circuits from the Lab™ reference
circuit boards. There are two controller boards in the platform:
the SDP-B, which is based on the Blackfin® ADSP-BF527, and
the SDP-S, which is a serial interface only controller board.
The SDP-S has a subset of the SDP-B functionality.
Interposer boards route signals between the SDP 120-pin con-
nector and a second connector. When the second connector is
also a 120-pin connector, the interposer can be used for signal
monitoring of the 120-pin connector signals. Alternatively, the
second connector allows SDP platform elements to be integrated
into a second platform, for example, the BeMicro SDK. More
information on the SDP can be found at www.analog.com/sdp.
UG-167