MCP2150DM Microchip Technology, MCP2150DM Datasheet - Page 16

• Manufacturer Part Number: MCP2150DM
• Description: BOARD DEMO FOR MCP2150
• Manufacturer: Microchip Technology

Specifications of MCP2150DM

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150
• Primary Attributes: IrDA Controller with PIC18F MCU
• Secondary Attributes: USB Interface
• Processor To Be Evaluated: MCP2150, MCP2155
• Processor Series: MCP215x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP2150 Developer’s Board User’s Guide
FIGURE 1-3:
DS51869A-page 16
These fourteen jumpers connect the MCP2150’s Host UART
Signals to either the PIC18F65J50 or the DB-9 connector
(after the UART Driver device)
JMP1:JMP7 / JMP8:JMP14
1.3.2
Figure 1-3 shows the five jumpers used to control the connection of the MCP2150’s
Host UART signals.
MCP2150 HOST UART INTERFACE CONNECTION
Host UART Interface Connection Jumper Descriptions
Host UART Signals connected
to PIC18F65J50
Host UART Signals connected
to UART Driver (DB-9)
Note: The PIC can also drive these
MCP2150 Host Interface
Baud Rate select Signals
JP3:JP1
signals. The supplied firmware
uses PIC I/O to drive these
signals based on the state of
the RD5:4 pins.
Host Interface operates at
115,200 Baud
Host Interface operates at
57,600 Baud
Host Interface operates at
19,200 Baud
Host Interface operates at
9,600 Baud
© 2009 Microchip Technology Inc.