MCP2150DM Microchip Technology, MCP2150DM Datasheet - Page 28

• Manufacturer Part Number: MCP2150DM
• Description: BOARD DEMO FOR MCP2150
• Manufacturer: Microchip Technology

Specifications of MCP2150DM

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150
• Primary Attributes: IrDA Controller with PIC18F MCU
• Secondary Attributes: USB Interface
• Processor To Be Evaluated: MCP2150, MCP2155
• Processor Series: MCP215x
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

MCP2150 Developer’s Board User’s Guide
TABLE 2-3:
DS51869A-page 28
Step Action
1
1
2
3
4
5
Place the Primary Device’s IR port and the MCP2150
Developer’s Board on a flat surface about 25 cm (10
inches) apart, and with the IR ports facing each other.
On the MCP2150 Developer’s Board:
Ensure that the jumpers are configured as in
Figure 2-5
On the MCP2150 Developer’s Board:
Apply power to the unit via the USB connector. The
PIC reset switch (S1) may be depressed and
released to ensure that the PIC had a good reset.
On the PC:
Open the HyperTerminal program window for the
Primary Device (such as COM 7).
Ensure that the window indicates that the
HyperTerminal program is connected.
On the PC:
In the HyperTerminal program window, type any
character.
On the PC:
Disconnect the HyperTerminal program window.
Note:
DEMO #2 STEPS - DATA STREAMING MODE
See D.1.2 “Configuring HyperTerminal
to connect to the IrDA Port (Virtual
Port)”
.
Result
—
—
On the MCP2150 Developer’s Board:
The green power LED (D1) will turn on.
On the MCP2150 Developer’s Board:
—
On the PC:
The system tray Icon will change from a single IR
Icon to two IR Icons facing each other. An IR Link is
now established.
On the MCP2150 Developer’s Board:
—
On the PC:
Then, a continuous stream of a 250 Byte table will be
received from the embedded system in the
HyperTerminal window (See for Appendix
E. “Continuously Transmitted Data Table”)
On the PC:
HyperTerminal program window no longer receives
data.
© 2009 Microchip Technology Inc.