101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 18

• Manufacturer Part Number: 101-1121
• Description: KIT CAMERA INTERFACE APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-1121

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Interface: 10/100 BaseT Ethernet
• Embedded: Yes, Other
• Utilized Ic / Part: RCM3365
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1119

2.2.2.1 Programming via Ethernet Option
An Ethernet cable connects a RabbitSys-enabled RCM3365 to the PC running Dynamic C
with Dynamic C RabbitSys via a DHCP network to download programs and to monitor
the RCM3365 module during debugging.
Use a straight-through CAT 5/6 Ethernet cable to connect the Ethernet jack on the RCM3365
to a DHCP-enabled network. Your PC should also be connected to this network—you will
need a second straight-through CAT 5/6 Ethernet cable to connect the PC to the network
since only one straight-through Ethernet cable is supplied with the Development Kit.
Figure 4. Connect Ethernet Cable for Ethernet Programming Option
You may also use a crossover CAT 5/6 Ethernet cable to connect the Ethernet jack on the
RCM3365 directly to your PC, but there will be additional steps required to configure the
TCP/IP parameters on the RCM3365 and on your PC if your PC does not have a DHCP
server. These steps are described in Appendix E.
12
RabbitCore RCM3365/RCM3375