101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 71

• Manufacturer Part Number: 101-1121
• Description: KIT CAMERA INTERFACE APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-1121

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Interface: 10/100 BaseT Ethernet
• Embedded: Yes, Other
• Utilized Ic / Part: RCM3365
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1119

•
•
6.6.1 RabbitWeb Sample Programs
You will need to have the Dynamic C RabbitWeb module installed before you run the
sample programs described in this section. The following sample programs are in the
Dynamic C
•
•
•
6.7 Where Do I Go From Here?
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Technical Bulletin Board and forums at
• Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample programs ran fine, you are now ready to go on.
Additional sample programs are described in the Dynamic C TCP/IP User’s Manual.
Please refer to the Dynamic C TCP/IP User’s Manual to develop your own applications.
An Introduction to TCP/IP provides background information on TCP/IP, and is available
on the CD and on our
User’s Manual
PINGLED.C
LEDs DS3 and DS4 on the Prototyping Board when a ping is sent and received.
SMTP.C
the S2 and S3 switches on the Prototyping Board are pressed. LEDs DS3 and DS4 on
the Prototyping Board will light up when e-mail is being sent.
BLINKLEDS.C
which the DS3 and DS4 LEDs on the Prototyping Board blink.
DOORMONITOR.C
in to the Prototyping Board when using this sample program. This program demon-
strates adding and monitoring passwords entered via the LCD/keypad module.
SPRINKLER.C
digital outputs in a 24-hour period.
and at www.rabbit.com/forums/.
NOTE: If you purchased your RCM3365/RCM3375 through a distributor or through a
Rabbit partner, contact the distributor or partner first for technical support.
—This program demonstrates using the SMTP library to send an e-mail when
SAMPLES\RCM3360\TCPIP\RABBITWEB
—This program demonstrates ICMP by pinging a remote host. It will flash
—This program demonstrates a basic example to change the rate at
—This program demonstrates how to schedule times for the relay and
—The optional LCD/keypad module (see Appendix C) must be plugged
Web
Help
site.
menu to get further assistance with Dynamic C.
folder.
www.rabbit.com/support/bb/
65