101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 52

• Manufacturer Part Number: 101-1121
• Description: KIT CAMERA INTERFACE APPLICATION
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r

Specifications of 101-1121

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Interface: 10/100 BaseT Ethernet
• Embedded: Yes, Other
• Utilized Ic / Part: RCM3365
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1119

5.2.6 Prototyping Board Functions
The functions described in this section are for use with the Prototyping Board features.
The source code is in the Dynamic C
need to modify it for your own board design.
The
used to configure the RCM3365/RCM3375 for use with RabbitNet peripheral boards on
the Prototyping Board.
Other generic functions applicable to all devices based on Rabbit microprocessors are
described in the Dynamic C Function Reference Manual.
5.2.6.1 Board Initialization
RETURN VALUE
46
void brdInit (void);
Call this function at the beginning of your program. This function initializes Parallel Ports A through G
for use with the Prototyping Board.
Summary of Initialization
None.
1. I/O port pins are configured for Prototyping Board operation.
2. Unused configurable I/O are set as tied inputs or outputs.
3. External I/O are disabled.
4. The LCD/keypad module is disabled.
5. RS-485 is not enabled.
6. RS-232 is not enabled.
7. LEDs are off.
8. Ethernet select is disabled.
9. Mass-storage flash select is disabled.
10. Motor control is disabled.
11. The RabbitNet SPI interface is disabled.
12. The relay is set to normally closed positions.
RCM33xx.LIB
library is supported by the
SAMPLES\RCM3300\RCM33xx.LIB
RN_CFG_RCM33.LIB
RabbitCore RCM3365/RCM3375
—library, which is
library if you