101-1121 Rabbit Semiconductor, 101-1121 Datasheet - Page 95
![KIT CAMERA INTERFACE APPLICATION](/photos/9/18/91835/101-1121_sml.jpg)
101-1121
Manufacturer Part Number
101-1121
Description
KIT CAMERA INTERFACE APPLICATION
Manufacturer
Rabbit Semiconductor
Series
RabbitCore 3000r
Specifications of 101-1121
Sensor Type
Motion, PIR (Pyroelectric Infrared)
Interface
10/100 BaseT Ethernet
Embedded
Yes, Other
Utilized Ic / Part
RCM3365
Interface Type
Ethernet
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Voltage - Supply
-
Sensitivity
-
Sensing Range
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
316-1119
- Current page: 95 of 164
- Download datasheet (3Mb)
The Prototyping Board comes with the basic components necessary to demonstrate the
operation of the RCM3365/RCM3375. Four user LEDs (DS3–DS6) are connected to
alternate I/O bus pins PA0–PA3 pins of the RCM3365/RCM3375 module via U8, and may
be driven as output indicators when controlled by PE7 and PG5 as shown in the sample
applications. Two switches (S2 and S3) are connected to PG0 and PG1 to demonstrate the
interface to the Rabbit 3000 microprocessor. Reset switch S1 is the hardware reset for the
RCM3365/RCM3375.
The Prototyping Board provides the user with RCM3365/RCM3375 connection points
brought out conveniently to labeled points at J8 and J9 on the Prototyping Board. Although
locations J8 and J9 are unstuffed, 2 × 17 headers are included in the bag of parts.
RS-232 and RS-485 signals are available on screw-terminal header J14, quadrature
decoder inputs are available on screw-terminal header J5, and digital inputs are available
on screw-terminal header J6. A 1 × 5 header strip from the bag of parts may be installed at
J12 for four sinking digital outputs. A 1 × 3 header strip from the bag of parts may be
installed at J13 to access selected signals from RCM3000, RCM3100, RCM3200,
RCM3300/RCM3310, and RCM3365/RCM3375 RabbitCore modules (J13 cannot be
used with the RCM3305/RCM3315).
If you don’t plan to use the LCD/keypad module, additional signals may be brought out on 1 × 5
and 1 × 8 headers from the bag of parts that you install at J15 and J16. If you don’t plan to
use the stepper-motor control option, additional CMOS outputs are available via a 1 × 8
header that you install at J10.
There is a through-hole prototyping space available on the Prototyping Board. The holes in
the prototyping area are spaced at 0.1" (2.5 mm). +3.3 V, +5 V, and GND traces run along
one edges of the prototyping area. Small to medium circuits can be prototyped using point-
to-point wiring with 20 to 30 AWG wire between the prototyping area, the +3.3 V, +5 V, and
GND traces, and the surrounding area where surface-mount components may be installed.
Small holes are provided around the surface-mounted components that may be installed
around the prototyping area.
B.4.1 Adding Other Components
There are two sets of pads for 6-pin, 16-pin, and 28-pin devices that can be used for sur-
face-mount prototyping devices. There are also pads that can be used for SMT resistors
and capacitors in an 0805 SMT package. Each component has every one of its pin pads
connected to a hole in which a 30 AWG wire can be soldered (standard wire wrap wire can
be soldered in for point-to-point wiring on the Prototyping Board). Because the traces are
very thin, carefully determine which set of holes is connected to which surface-mount pad.
User’s Manual
89
Related parts for 101-1121
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![101-0577](/photos/37/60/376010/bl2500_600_tmb.jpg)
Part Number:
Description:
KIT DEV FOR BL2500 COYOTE
Manufacturer:
Rabbit Semiconductor
Datasheet:
![101-1288](/photos/9/18/91834/101-1288_tmb.jpg)
Part Number:
Description:
KIT APPLICATION SIMPLE SENSOR
Manufacturer:
Rabbit Semiconductor
Datasheet:
![101-1063](/photos/37/58/375899/101-1063_tmb.jpg)
Part Number:
Description:
KIT APPLICATION LCD COLOR INT'L
Manufacturer:
Rabbit Semiconductor
![20-668-0003](/photos/6/76/67658/316-100-pqfp_tmb.jpg)
Part Number:
Description:
IC CPU RABBIT2000 30MHZ 100PQFP
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-668-0024](/photos/6/76/67659/316-128-lqfp_tmb.jpg)
Part Number:
Description:
IC CPU RABBIT4000 128-LQFP
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-668-0011](/photos/6/76/67659/316-128-lqfp_tmb.jpg)
Part Number:
Description:
IC MPU RABIT3000A 55.5MHZ128LQFP
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-1112](/photos/37/59/375946/rcm4000_rgb_300_tmb.jpg)
Part Number:
Description:
MODULE RABBITCORE RCM4010
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-1093](/photos/6/74/67458/20-101-1093_tmb.jpg)
Part Number:
Description:
RCM4110 RABBITCORE
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0404](/photos/6/74/67469/101-0404_tmb.jpg)
Part Number:
Description:
MODULE RABBITCORE RCM2000
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0507](/photos/6/74/67473/101-0507_tmb.jpg)
Part Number:
Description:
MODULE RABBITCORE RCM3000
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-1094](/photos/6/74/67480/20-101-1094_tmb.jpg)
Part Number:
Description:
MCU RCM4000 RABBITCORE
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-1132](/photos/6/74/67484/20-101-1132_tmb.jpg)
Part Number:
Description:
MODULE RCM4210 RABBITCORE
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-1131](/photos/6/74/67490/20-101-1131_tmb.jpg)
Part Number:
Description:
MODULE RCM4200 RABBITCORE
Manufacturer:
Rabbit Semiconductor
Datasheet:
![20-101-0383](/photos/6/74/67456/101-0383_tmb.jpg)
Part Number:
Description:
MODULE RABBITCORE RCM2020
Manufacturer:
Rabbit Semiconductor
Datasheet: