MPC8272ADS Freescale Semiconductor, MPC8272ADS Datasheet - Page 95

• Manufacturer Part Number: MPC8272ADS
• Description: KIT DEVELOPMENT MPC8272
• Manufacturer: Freescale Semiconductor
• Type: MPUr

Specifications of MPC8272ADS

• Contents: Board
• For Use With/related Products: MPC8272
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.2.3
The ATM 155 I/F to the media is optical rather than electrical. Use is done with HP’s HFBR
5805 optical I/F, which is placed on the edge of the board for convenient connection.
7.2.4
The RS232 port connector is a stacked 9-pin, 90
space (made of two connectors for two ports).
7.2.5
The CPM expansion connectors carries all CPM pins, that is, Port A to Port D signals. Use
is done with DIN 41612, 128 pin T.H. PCB connector, residing on the board, allowing
convenient vertical connection to off-board tools. Power supply pins are also provided
through this connector.
7.2.6
The debug port connector is a Motorola standard COP/JTAG connector for the 60X
processors family. It is a generic 16-pin (2 X 8), male, SMD, 90
connector.
7.2.7
To support fast connection to HP’s 16500 logic analyzers series for debugging purposes, a
set of dedicated connectors is provided. Use is done with 38-pin, SMT, high density,
matched impedance MICTOR connectors that AMP makes.
These connectors carry the unbuffered 60X signals and should be placed as near to the
PowerQUICC II as possible to provide short PCB routes to yield better reflections and
crosstalk immunity. They also carry the PCI bus signals. CPM signals also have connectors.
7.2.8
This is a 10 pin generic 0.100" pitch header connector, providing In System Programming
capability for Vantis-made programmable logic on board.
7.2.9
A set of three standard PCI 3.3V keyed, 124 pin, 32-bit connectors is provided for
connecting up to three PCI add-in cards.
ATM 155 Port Connection
RS232 Port Connector
CPM Expansion Connector
COP/JTAG Port Connector
Logic Analyzer Connectors
Mach’s In System Programming (ISP) Connector
PCI Connectors
Chapter 7. Physical Properties
0
, female D-Type connector that saves board
O
protected header
Connectors