M30850T2-CPE Renesas Electronics America, M30850T2-CPE Datasheet - Page 17

• Manufacturer Part Number: M30850T2-CPE
• Description: DEV M32C/80/84/85/86 COMPACT EMU
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30850T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M32C/84,85,86
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30850T2-CPE User’s Manual
(5) Power supply for the user system
(6) Host machine
(7) Pitch converter board such as M30800T-PTC (included)
1.2.2 Names and Functions of each part of the Emulator
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
Figure 1.2 Names of the LEDs on the upper panel of the M30850T2-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit’s operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
REJ10J0865-0300 Rev.3.00 December 16, 2005
POWER
SAFE
Name
This is a power supply for the user system. As this emulator cannot supply the power to the user system, supply the power
to the user system separately from the emulator.
This is a personal computer for controlling the emulator.
This is a pitch converter board for connecting to an MCU foot pattern on the user system (for 100-pin 0.65-mm-pitch
LCC socket). For details, refer to “2.8 Connecting the User System” (page 30).
Target status LEDs
LED3: User system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET pin (RESET)
LED4: Program execution (RUN)
System status LEDs
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
Number
LED1
LED2
Orange
Green
Color
POWER
LED 1
POWER
CLOCK
RESET
SAFE
Status
RUN
OFF
OFF
ON
ON
LED 3
LED
LED2
6
POWER
SAFE
COMPACT EMULATOR
RUN
POWER
CLOCK
RESET
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Emulator system has not started normally.
STATUS
M30850T2 - CPE
COMPACT EMULATOR
SYSTEM
TARGET
STATUS
MADE IN JAPAN
MADE
Meaning
POWER USB
5.0V
5.0V
JP2
3.3V
EXT
JP1
INT
J1: Power connector
J2: USB interface connector
SW1
System reset switch
Switches and selection jumpers on the M30850T2-EPBM
SW1 -- SW5 and JP1 (emulator side panel)
JP2: MCU power supply voltage selection jumper
JP1: MCU power supply source selection jumper
(factory-setting: 5.0 V)
(factory-setting : INT)
Page 15 of 98
1. Outline