M30850T2-CPE Renesas Electronics America, M30850T2-CPE Datasheet - Page 20

• Manufacturer Part Number: M30850T2-CPE
• Description: DEV M32C/80/84/85/86 COMPACT EMU
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30850T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M32C/84,85,86
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30850T2-CPE User’s Manual
1.3 Specifications
Table 1.5 and 1.6 list specifications of the M30850T2-CPE.
Table 1.5 M30850T2-CPE specifications (1/2)
* Notes on Using This Product in Dual-power Supply Specification
These precautions only need to be observed when using an emulator, and does not apply for the actual MCU.
REJ10J0865-0300 Rev.3.00 December 16, 2005
Applicable MCUs
Evaluation MCU
Usable mode
Maximum operating frequency
Applicable power supply
Basic debugging functions
Real-time trace function
Real-time RAM monitor function
Hardware break function
Execution time measurement function
- If using this product when the voltage of VCC1 is higher than that of VCC2, the VCC2 must be 3.3 V or more.
- If using a CPU clock of more than 30MHz, set the SFR area of the intelligent I/O function to 2-wait (set the PM13 bit to
"1") when reading this area.
M32C/80, 84, 85 and 86 Groups
M30855FHGP
ROM size: 512 KB + 4 KB, RAM size: 24 KB
Single-chip mode
Memory expansion mode
VCC1=VCC2=4.2--5.5V: 32MHz
VCC1=VCC2=3.0--5.5V: 24MHz
Dual-power supply specification*
(4.8 V ≤ VCC1 ≤ 5.2 V and 3.3 V ≤ VCC2 < VCC1): 32MHz
User system connected
(JP1=EXT)
User system not connected
(JP1=INT)
- Download
- Software break (max. 64 points)
- Program execution/stop (allows free-run execution supporting software breaks)
- Memory reference/setting (reference/setting C-variables, run-time execution)
- Register reference/setting
- Disassemble display
- C-level debugging, etc.
- 64K-cycle bus information recordable
- 5 trace modes supported (Break/Before/About/After/Full)
- Can be recorded ON/OFF by events
- 1,024 bytes (256 bytes x4)
- Data/last access result
2 points (Address match, bus match, max. 255 pass counts)
Time between program start and stop
(Address: 24-bit, Data: 16-bit, MCU status: 12-bit)
3.0--5.5 V
3.3 V or 5.0 V
(supplied from the emulator, set by JP2)
Page 18 of 98
1. Outline