M30850T2-CPE Renesas Electronics America, M30850T2-CPE Datasheet - Page 29

• Manufacturer Part Number: M30850T2-CPE
• Description: DEV M32C/80/84/85/86 COMPACT EMU
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30850T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M32C/84,85,86
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30850T2-CPE User’s Manual
Figure 2.9 Target status LEDs display when the emulator starts up normally (when user system connected)
REJ10J0865-0300 Rev.3.00 December 16, 2005
Note on the Target Status CLOCK LED:
If the LED is not turned on, check the following.
(1) After powering on the emulator (before starting up the emulator debugger):
(2) After the emulator debugger is started up (after the Init dialog box settings are completed):
Make sure that the oscillator circuit board is properly installed in the emulator and it is oscillating normally.
Make sure that the oscillator selected in the Init dialog box is oscillating normally.
When the POWER LED does not light,
shut off the system and check the
setting of the jumper switches and if
the power is properly supplied to the
user system.
When the user system connected:
: ON
:OFF
IMPORTANT
POWER
CLOCK
RESET
RUN
LED3
LED4
LED5
LED6
Page 27 of 98
2. Setup