HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 10

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.2
To connect the E10A emulator (hereinafter referred to as the emulator), the H-UDI port connector
must be installed on the user system to connect the user system interface cable. When designing
the user system, refer to the recommended circuit between the H-UDI port connector and the
MCU. In addition, read the E10A emulator user's manual and hardware manual for the related
device.
1.3
Table 1.2 shows the recommended H-UDI port connectors for the emulator.
Table 1.2 Recommended H-UDI Port Connectors
Connector
14-pin connector
Note: Do not install any components within 3 mm of the H-UDI port connector.
1.4
Figure 1.1 shows the pin assignments of the H-UDI port connector.
Note: Note that the pin number assignments of the H-UDI port connector shown on the
2
following pages differ from those of the connector manufacturer.
Connecting the E10A Emulator with the User System
Installing the H-UDI Port Connector on the User System
Pin Assignments of the H-UDI Port Connector
Type Number
2514-6002
Manufacturer
Minnesota Mining &
Manufacturing Ltd.
Specifications
14-pin straight type