HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 34

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes: 1. Check that the interrupt handler operates normally before using this function. In
26
2.
3.
4.
5.
To process NMIs and peripheral module interrupts
Specify "all" in the <interrupt_enable> option of the INTERRUPT command.
To switch to the mode in which no interrupt is processed:
Specify "disable" in the <interrupt_enable> option of the INTERRUPT command.
addition, do not execute a non-limited loop or the sleep instruction in the interrupt
handler. If the processing of the handler does not end, the emulator generates a
Communication Timeout error.
When interrupts are accepted during user program execution and emulator command
execution state, user interrupt processing is not traced. In this case, continuous trace
is not enabled.
Use the NOP instruction at the delay slot after the RTE instruction in the interrupt
handler.
If a user interrupt is inserted while the user program breaks until the processing ends,
do not set a BREAKPOINT in the interrupt handler. The emulator may generate a
Communication Timeout error. Use the Break Condition function.
For details on window function and command-line syntax, refer to the online help.