HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 22

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Notes: 1. For the SH7750 E10A emulator, trace acquisition of the eight latest branch instructions
1. Notes on the [Trace] Window
14
(1) If an interrupt is generated at the program execution start or end, including a step operation,
(2) If a TLB error occurs while acquired trace information is displayed, the following error
the emulator address may be acquired. In such a case, the following message will be
displayed. Ignore this address because it is not a user program address.
message will be displayed.
5.
6.
2. If an interrupt is generated at the program execution start or end, including a step
3. If a TLB error occurs while acquired trace information is displayed, the following error
4. When MMU settings are modified or when a user program is changed between GO
*** EML ***
is enabled.
operation, the emulator address may be acquired. In such a case, the following
message will be displayed. Ignore this address because it is not a user program
address.
message will be displayed.
After a TLB error, trace acquisition cannot be performed.
command completion and trace display, the displayed mnemonics or operand may not
be correct.
If a completion-type exception occurs during exception branch acquisition, the next
address to the address in which an exception occurs is acquired.
When a user interrupt is enabled by the INTERRUPT command during the emulator
command wait state or user program execution, an interrupt that is generated at the
program execution start or end, including a step operation, can be traced in realtime.
*** EML ***
Figure 2.1 Message Box for Clearing a TLB Error