HS7750KCI01H Renesas Electronics America, HS7750KCI01H Datasheet - Page 26

• Manufacturer Part Number: HS7750KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America

Specifications of HS7750KCI01H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

12. When a BREAKPOINT is set to the cacheable area, the cache block containing the
13. While a BREAKPOINT is set, the contents of the instruction cache are disabled at execution
2.2.6
1. When [Go to cursor], [Step In], [Step Over], or [Step Out] is selected, the settings of Break
2. Break Condition 4 is disabled when an instruction to which a BREAKPOINT has been set is
3. When a Break Condition is satisfied, emulation may stop after two or more instructions have
4. If a PC break address condition is set to the slot instruction after a delayed branch instruction,
2.2.7
In the [Configuration] dialog box, if [User] is set while the [UBC mode] list box has been set, the
STEP-type commands that use Break Condition 2 for implementation cannot be used.
2.2.8
The SH7750 E10A emulator supports the performance measurement function.
1. Setting the performance measurement conditions
18
BREAKPOINT address is filled immediately before and after user program execution.
completion.
Condition 4 are disabled.
executed. Accordingly, do not set a BREAKPOINT to an instruction which satisfies Break
Condition 4.
been executed.
user program execution cannot be terminated before the slot instruction execution; execution
stops before the branch destination instruction.
To set the performance measurement conditions, use the [CPU Performance] dialog box and
the PERFORMANCE_SET command. When any line on the [Performance Analysis] window
is clicked with the right mouse button, the popup menu is displayed and the [CPU
Performance] dialog box is displayed by selecting [Setting].
Notes on Setting the [Break Condition] Dialog Box and the BREAKCONDITION_
SET Command
Notes on Setting the UBC_MODE Command
Performance Measurement Function