1249B B&K Precision, 1249B Datasheet - Page 27

• Manufacturer Part Number: 1249B
• Description: COLOR GENERATORNTSC/RGB
• Manufacturer: B&K Precision
• Type: NTSC Benchtopr

Specifications of 1249B

• Patterns: Bar, Dot, Crosshatch, Raster
• Connection Method: RCA, RF, S-Video
• Power Source: 105,130VAC
• Signal Generator Type: NTSC Pattern
• Supply Voltage Range: 105V To 130V
• External Height: 86mm
• External Width: 290mm
• External Depth: 264mm
• Frequency: 30 Hz
• Equipment Type: NTSC Pattern Generators
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na
• Other names: BK1249B

2.
3.
4.
SIMULTANEOUS OUTPUTS
simultaneously if desired. This can be a valuable aid in many
applications. These outputs are summarized as follows:
OPERATING INSTRUCTIONS (CONT.)
For maximum flexibility, all output jacks may be used
Connect another cable from the COMP SYNC output
jack to the external trigger input of the oscilloscope.
Select the external triggering mode on the oscilloscope.
A sweep rate of about 10µs/div is appropriate for
viewing horizontal tines of composite video, 2 ms/div
for viewing vertical fields, and 5 ms/div for viewing
vertical frames. The sweep vernier may be used for tine
adjustment of the waveform display.
27
available when the instrument is operating. The video
component of the signal is dependent upon the selected
pattern.
instrument is operating. It may be set to operate on
channel 3, channel 4, or i-f frequencies. It is modulated
by the same signal that appears at the COMPOSITE
VIDEO output jack (however. level is fixed and sync
pulse is negative going), although the modulated 4.5MHz
subcarrier can be added.
continuously available. The COMP SYNC output
supplies negative polarity sync, and the Vs and Hs sync
outputs supply positive polarity signals. The 30Hz
signals is a TTL level square wave useful for video
recorder troubleshooting.
The COMPOSITE VIDEO output is continuously
The IF/RF output is continuously available when the
The COMP SYNC, Vs, Hs, and 30 Hz are also