PIC24HJ64GP502-I/MM Microchip Technology, PIC24HJ64GP502-I/MM Datasheet - Page 251

• Manufacturer Part Number: PIC24HJ64GP502-I/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-I/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 4KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

24.0
The Parallel Master Port (PMP) module is a parallel
8-bit I/O module, specifically designed to communi-
cate with a wide variety of parallel devices, such as
communication peripherals, LCDs, external memory
FIGURE 24-1:
© 2011 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
Parallel Master Port
Note 1: 28-pin devices do not have PMA<10:2>.
2: Some registers and associated bits
PARALLEL MASTER PORT
(PMP)
PIC24H
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
of
PIC24HJ64GPX02/X04
PIC24HJ128GPX02/X04
devices. It is not intended to be a compre-
hensive reference source. To comple-
ment the information in this data sheet,
refer to Section 35. “Parallel Master
Port
“dsPIC33F/PIC24H Family Reference
Manual”, which is available from the
Microchip website (www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
(PMP)”
the
PMP MODULE OVERVIEW
PIC24HJ32GP302/304,
(DS70299)
families
PMA<0>
PMALL
PMA<1>
PMALH
PMA<10:2>
PMCS1
PMBE
PMRD
PMRD/PMWR
PMWR
PMENB
PMD<7:0>
PMA<7:0>
PMA<10:8>
PMA<14>
of
and
the
(1)
of
in
Microcontroller
devices and microcontrollers. Because the interface
to parallel peripherals varies significantly, the PMP is
highly configurable.
Key features of the PMP module include:
• Fully Multiplexed Address/Data Mode
• Demultiplexed or Partially Multiplexed Address/
• Single Chip Select Line
• Programmable Strobe Options:
• Address Auto-Increment/Auto-Decrement
• Programmable Address/Data Multiplexing
• Programmable Polarity on Control Signals
• Legacy Parallel Slave Port Support
• Enhanced Parallel Slave Support:
• Programmable Wait States
• Selectable Input Voltage Levels
Data Mode:
- Up to 11 address lines with single Chip Select
- Up to 12 address lines without Chip Select
- Individual Read and Write Strobes or;
- Read/Write Strobe with Enable Strobe
- Address Support
- 4-Byte Deep Auto-Incrementing Buffer
Up to 11-Bit Address
8-Bit Data
LCD
Address Bus
Data Bus
Control Lines
Buffer
FIFO
DS70293E-page 251
EEPROM