PIC24HJ64GP502-I/MM Microchip Technology, PIC24HJ64GP502-I/MM Datasheet - Page 254

• Manufacturer Part Number: PIC24HJ64GP502-I/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-I/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 4KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
Register 24-2:
DS70293E-page 254
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14-13
bit 12-11
bit 10
bit 9-8
bit 7-6
bit 5-2
bit 1-0
Note 1:
R/W-0
BUSY
R-0
WAITB<1:0>
WAITB and WAITE bits are ignored whenever WAITM3:WAITM0 = 0000.
BUSY: Busy bit (Master mode only)
1 = Port is busy (not useful when the processor stall is active)
0 = Port is not busy
IRQM<1:0>: Interrupt Request Mode bits
11 = Interrupt generated when Read Buffer 3 is read or Write Buffer 3 is written (Buffered PSP mode)
10 = No interrupt generated, processor stall activated
01 = Interrupt generated at the end of the read/write cycle
00 = No interrupt generated
INCM<1:0>: Increment Mode bits
11 = PSP read and write buffers auto-increment (Legacy PSP mode only)
10 = Decrement ADDR<10:0> by 1 every read/write cycle
01 = Increment ADDR<10:0> by 1 every read/write cycle
00 = No increment or decrement of address
MODE16: 8/16-bit Mode bit
1 = 16-bit mode: data register is 16 bits, a read or write to the data register invokes two 8-bit transfers
0 = 8-bit mode: data register is 8 bits, a read or write to the data register invokes one 8-bit transfer
MODE<1:0>: Parallel Port Mode Select bits
11 =Master mode 1 (PMCS1, PMRD/PMWR, PMENB, PMBE, PMA<x:0> and PMD<7:0>)
10 =Master mode 2 (PMCS1, PMRD, PMWR, PMBE, PMA<x:0> and PMD<7:0>)
01 =Enhanced PSP, control signals (PMRD, PMWR, PMCS1, PMD<7:0> and PMA<1:0>)
00 =Legacy Parallel Slave Port, control signals (PMRD, PMWR, PMCS1 and PMD<7:0>)
WAITB<1:0>: Data Setup to Read/Write Wait State Configuration bits
11 = Data wait of 4 T
10 = Data wait of 3 T
01 = Data wait of 2 T
00 = Data wait of 1 T
WAITM<3:0>: Read to Byte Enable Strobe Wait State Configuration bits
1111 = Wait of additional 15 T
•
•
•
0001 = Wait of additional 1 T
0000 = No additional wait cycles (operation forced into one T
WAITE<1:0>: Data Hold After Strobe Wait State Configuration bits
11 = Wait of 4 T
10 = Wait of 3 T
01 = Wait of 2 T
00 = Wait of 1 T
R/W-0
R/W-0
(1)
or on a read or write operation when PMA<1:0> = 11 (Addressable PSP mode only)
PMMODE: PARALLEL PORT MODE REGISTER
IRQM<1:0>
W = Writable bit
‘1’ = Bit is set
CY
CY
CY
CY
R/W-0
R/W-0
CY
CY
CY
CY
; multiplexed address phase of 4 T
; multiplexed address phase of 3 T
; multiplexed address phase of 2 T
; multiplexed address phase of 1 T
CY
CY
R/W-0
R/W-0
WAITM<3:0>
INCM<1:0>
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
CY
CY
CY
CY
MODE16
CY
R/W-0
R/W-0
)
(1)
(1)
© 2011 Microchip Technology Inc.
x = Bit is unknown
R/W-0
R/W-0
WAITE<1:0>
MODE<1:0>
R/W-0
R/W-0
(1)
bit 8
bit 0