PIC24HJ64GP502-I/MM Microchip Technology, PIC24HJ64GP502-I/MM Datasheet - Page 64

• Manufacturer Part Number: PIC24HJ64GP502-I/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-I/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel / 12 bit, 10 Channel
• Controller Family/series: PIC24
• No. Of I/o's: 21
• Ram Memory Size: 4KB
• Cpu Speed: 40MIPS
• No. Of Timers: 7
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
TABLE 6-2:
6.2
A Power-on Reset (POR) circuit ensures the device is
reset from power-on. The POR circuit is active until
V
has elapsed. The delay T
device bias circuits become stable.
The device supply voltage characteristics must meet
the
requirements to
Section 28.0 “Electrical Characteristics”
The POR status bit (POR) in the Reset Control register
(RCON<0>) is set to indicate the Power-on Reset.
DS70293E-page 64
V
T
V
T
T
T
DD
POR
BOR
PWRT
FSCM
POR
BOR
Note:
crosses the V
specified
Power-on Reset (POR)
When
condition (begins normal operation), the
device operating parameters (voltage,
frequency, temperature, etc.) must be
within their operating ranges, otherwise
the device may not function correctly.
The user application must ensure that
the delay between the time power is
first applied, and the time SYSRST
becomes inactive, is long enough to get
all
specification.
Symbol
starting
OSCILLATOR DELAY
operating
POR
generate
the
threshold and the delay T
device
voltage
POR
the
parameters
ensures the internal
exits
POR.
POR threshold
POR extension time
BOR threshold
BOR extension time
Programmable power-up time delay
Fail-Safe Clock Monitor Delay
and
the
for details.
rise
Refer
Reset
within
POR
rate
Parameter
to
6.2.1
The on-chip regulator has a Brown-out Reset (BOR)
circuit that resets the device when the V
(V
cuit keeps the device in Reset until V
threshold and the delay T
T
stable.
The BOR status bit (BOR) in the Reset Control register
(RCON<1>) is set to indicate the Brown-out Reset.
The device will not run at full speed after a BOR as the
V
operation. The PWRT provides power-up time delay
(T
stabilized at the appropriate levels for full-speed
operation before the SYSRST is released.
The power-up timer delay (T
the
(FPWRT<2:0>) in the POR Configuration
(FPOR<2:0>), which provides eight settings (from 0 ms
to 128 ms). Refer to
for further details.
Figure 6-3
reset delay (T
rises above the V
BOR
DD
PWRT
DD
< V
should rise to acceptable levels for full-speed
Power-on
ensures the voltage regulator output becomes
) to ensure that the system power supplies have
BOR
Brown-out Reset (BOR) and
Power-up timer (PWRT)
shows the typical brown-out scenarios. The
) for proper device operation. The BOR cir-
1.8V nominal
30 μs maximum
2.5V nominal
100 μs maximum
0-128 ms nominal
900 μs maximum
BOR
BOR
Reset
+ T
Section 25.0 “Special Features”
PWRT
trip point
© 2011 Microchip Technology Inc.
BOR
Timer
) is initiated each time V
PWRT
Value
has elapsed. The delay
Value
) is programmed by
DD
crosses V
DD
Select
is too low
register
BOR
bits
DD