AT91SAM7S32B-AU Atmel, AT91SAM7S32B-AU Datasheet - Page 497

• Manufacturer Part Number: AT91SAM7S32B-AU
• Description: IC MCU ARM7 32KB FLASH 48LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32B-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Cpu Family: 91S
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 55MHz
• Interface Type: SPI/TWI/USART
• Total Internal Ram Size: 8KB
• # I/os (max): 21
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 48
• Package Type: LQFP
• Package: 48LQFP
• Family Name: AT91
• Maximum Speed: 55 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

35. USB Device Port (UDP)
35.1
Table 35-1.
6175K–ATARM–30-Aug-10
Endpoint Number
0
1
2
3
Overview
USB Endpoint Description
Mnemonic
The USB Device Port (UDP) is compliant with the Universal Serial Bus (USB) V2.0 full-speed
device specification.
Each endpoint can be configured in one of several USB transfer types. It can be associated with
one or two banks of a dual-port RAM used to store the current data payload. If two banks are
used, one DPR bank is read or written by the processor, while the other is read or written by the
USB device peripheral. This feature is mandatory for isochronous endpoints. Thus the device
maintains the maximum bandwidth (1M bytes/s) by working with endpoints with two banks of
DPR.
Suspend and resume are automatically detected by the USB device, which notifies the proces-
sor by raising an interrupt. Depending on the product, an external signal can be used to send a
wake up to the USB host controller.
EP0
EP1
EP2
EP3
Dual-Bank
Yes
Yes
No
No
AT91SAM7S Series Preliminary
Max. Endpoint Size
64
64
64
8
Control/Bulk/Interrupt
Control/Bulk/Interrupt
Bulk/Iso/Interrupt
Bulk/Iso/Interrupt
Endpoint Type
497