AT91SAM7S32B-AU Atmel, AT91SAM7S32B-AU Datasheet - Page 762

• Manufacturer Part Number: AT91SAM7S32B-AU
• Description: IC MCU ARM7 32KB FLASH 48LQFP
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S32B-AU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: I²C, SPI, SSC, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Cpu Family: 91S
• Device Core: ARM7TDMI
• Device Core Size: 32b
• Frequency (max): 55MHz
• Interface Type: SPI/TWI/USART
• Total Internal Ram Size: 8KB
• # I/os (max): 21
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 1.95/3.6V
• Operating Supply Voltage (min): 1.65/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 48
• Package Type: LQFP
• Package: 48LQFP
• Family Name: AT91
• Maximum Speed: 55 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7S-EK - KIT EVAL FOR ARM AT91SAM7S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Compliant

752
Version
6175H
Version
6175G
AT91SAM7S Series Preliminary
Comments (Continued)
All AT91SAM7S:
“Analog-to-Digital Converter
“USART: DCD is active High instead of
“SPI: Bad Serial Clock Generation on 2nd Chip
“SPI: Bad Behavior when CSAAT = 1 and SCBR =
AT91SAM7S256 Mfg # 58818C, AT91SAM7S256 Parts.A, AT91SAM7S128 Mfg # 58818C,
AT91SAM7S128 Parts A,
added the following:
Section 40.6.14.2 ”WDT: The Watchdog Timer Status Register and Interrupt”
Section 40.7.13.2 ”WDT: The Watchdog Timer Status Register and Interrupt”
Section 40.10.14.2 ”WDT: The Watchdog Timer Status Register and Interrupt”
Section 40.11.13.2 ”WDT: The Watchdog Timer Status Register and Interrupt”
AT91SAM7S512
AT91SAM7S512/256/128, added the following: (and in newly added “B Parts”)
Section 40.4.9.4 ”USART: RXBRK Flag Error in Asynchronous Mode”
Section 40.6.12.4 ”USART: RXBRK Flag Error in Asynchronous Mode”
Section 40.10.12.4 ”USART: RXBRK Flag Error in Asynchronous Mode”
Section 40.11.11.4 ”USART: RXBRK Flag Error in Asynchronous Mode”
Comments
Added note to
TC: added
SAM-BA Boot:
no longer available on web.)
UDP:
Errata: items added to the Errata Sections listed below.
Section 40.6 ”AT91SAM7S256 Errata - Manufacturing Number 58818C”
Section 40.7 ”AT91SAM7S256 Errata - Revision A Parts”
Section 40.10 ”AT91SAM7S128 Errata - Manufacturing Number 58818C”
Section 40.11 ”AT91SAM7S128 Errata - Revision A Parts”
Watchdog Timer: ”The Watchdog Timer May Lock the Device in a Reset State”
Real-time Timer: “RTT_VR May be Corrupted”
Power Management Controller: “Slow Clock Selected in PMC and a Transition Occurs on PA1” and
“Programming CSS in PMC_MCKR Register”
Table 35-2, “USB Communication
Figure 32-2 ”Clock Chaining Selection” page 393
Section 40.4.9.1 ”USART: CTS in Hardware Handshaking”
“Description” on page 3
Section 21.5.3 ”USB Device
(ADC)”, errata applies to all AT91SAM7S products.
Low”, errata applies to all AT91SAM7S products.
Flow”, Isochronous supported endpoint size is 64.
Port”reference to INF example and lit°6123 removed. (Doc
Select”, errata applies to all AT91SAM7S products.
1”, errata applies to all AT91SAM7S products.
updated
6175K–ATARM–30-Aug-10
Change
Request
Ref.
3442
3342
3647
3475
3652
Change
Request
Ref.
4752
rfo
3811
3954
4646