DSPIC33FJ128MC202-I/MM Microchip Technology, DSPIC33FJ128MC202-I/MM Datasheet - Page 294

• Manufacturer Part Number: DSPIC33FJ128MC202-I/MM
• Description: IC DSPIC MCU/DSP 128K 28-QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ128MC202-I/MM

• Program Memory Type: FLASH
• Program Memory Size: 128KB (128K x 8)
• Package / Case: 28-QFN
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Data Ram Size: 8 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
REGISTER 24-1:
DS70291E-page 294
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7
Note 1:
C2OUT
CMIDL
R/W-0
R-0
2:
If C2OUTEN = 1, the C2OUT peripheral output must be configured to an available RPx pin. See
Section 11.6 “Peripheral Pin Select”
If C1OUTEN = 1, the C1OUT peripheral output must be configured to an available RPx pin. See
Section 11.6 “Peripheral Pin Select”
CMIDL: Stop in Idle Mode bit
1 = When device enters Idle mode, module does not generate interrupts. Module is still enabled
0 = Continue normal module operation in Idle mode
Unimplemented: Read as ‘0’
C2EVT: Comparator 2 Event bit
1 = Comparator output changed states
0 = Comparator output did not change states
C1EVT: Comparator 1 Event bit
1 = Comparator output changed states
0 = Comparator output did not change states
C2EN: Comparator 2 Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
C1EN: Comparator 1 Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
C2OUTEN: Comparator 2 Output Enable bit
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
C1OUTEN: Comparator 1 Output Enable bit
1 = Comparator output is driven on the output pad
0 = Comparator output is not driven on the output pad
C2OUT: Comparator 2 Output bit
When C2INV = 0:
1 = C2 V
0 = C2 V
When C2INV = 1:
0 = C2 V
1 = C2 V
C1OUT
U-0
R-0
—
CMCON: COMPARATOR CONTROL REGISTER
IN
IN
IN
IN
+ > C2 V
+ < C2 V
+ > C2 V
+ < C2 V
W = Writable bit
‘1’ = Bit is set
C2EVT
C2INV
R/W-0
R/W-0
IN
IN
IN
IN
-
-
-
-
C1EVT
C1INV
R/W-0
R/W-0
for more information.
for more information.
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(1)
(2)
C2NEG
R/W-0
R/W-0
C2EN
C2POS
R/W-0
R/W-0
C1EN
© 2011 Microchip Technology Inc.
C2OUTEN
x = Bit is unknown
C1NEG
R/W-0
R/W-0
(1)
C1OUTEN
C1POS
R/W-0
R/W-0
bit 8
bit 0
(2)