AT89C5130A-PUTUM Atmel, AT89C5130A-PUTUM Datasheet - Page 66

• Manufacturer Part Number: AT89C5130A-PUTUM
• Description: IC 8051 MCU FLASH 16K USB 32QFN
• Manufacturer: Atmel
• Series: AT89C513xr

Specifications of AT89C5130A-PUTUM

• Core Processor: C52X2
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: LED, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Package: 32QFN EP
• Device Core: 8051
• Family Name: 89C
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 34
• Interface Type: SPI/TWI/UART/USB
• Number Of Timers: 3
• Processor Series: AT89x
• Core: 8051
• Data Ram Size: 1.25 KB
• Maximum Clock Frequency: 48 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: AT89STK-05
• Minimum Operating Temperature: - 40 C
• Height: 0.95 mm
• Length: 7 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 7 mm
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: AT89C5130A-PUTIM; AT89C5130A-PUTIM

Figure 14-4. PCA Compare Mode and PCA Watchdog Timer
14.3
66
High Speed Output Mode
CCAPnH
AT89C5130A/31A-M
Write to
1
CCAPnL
Write to
0
Note:
Before enabling ECOM bit, CCAPnL and CCAPnH should be set with a non zero value, other-
wise an unwanted match could happen. Writing to CCAPnH will set the ECOM bit.
Once ECOM set, writing CCAPnL will clear ECOM so that an unwanted match doesn’t occur
while modifying the compare value. Writing to CCAPnH will set ECOM. For this reason, user
software should write CCAPnL first, and then CCAPnH. Of course, the ECOM bit can still be
controlled by accessing to CCAPMn register.
In this mode, the CEX output (on port 1) associated with the PCA module will toggle each time a
match occurs between the PCA counter and the module's capture registers. To activate this
mode the TOG, MAT, and ECOM bits in the module's CCAPMn SFR must be set (see
Figure 14-5).
A prior write must be done to CCAPnL and CCAPnH before writing the ECOMn bit.
Reset
Enable
1. Only for Module 4
CCAPnH
CH
PCA Counter/Timer
16-bit Comparator
CIDL
CF
ECOMn
WDTE
CCAPnL
CR
CL
CAPPn
Match
CAPNn MATn TOGn PWMn ECCFn
CCF4
CCF3
CCF2 CCF1 CCF0
CPS1 CPS0
ECF
CCON
0xD8
CCAPMn, n = 0 to 4
0xDA to 0xDE
CMOD
0xD9
PCA IT
RESET
4337K–USB–04/08
(1)