ST7FLITE25F2B6 STMicroelectronics, ST7FLITE25F2B6 Datasheet - Page 9

• Manufacturer Part Number: ST7FLITE25F2B6
• Description: IC MCU 8BIT 8K FLASH 20DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE25F2B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4 bit
• Operating Supply Voltage: 2.4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13 bit
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: In Transition
• Other names: 497-4858

3 REGISTER & MEMORY MAP
As shown in
dressing 64K bytes of memories and I/O registers.
The available memory locations consist of 128
bytes of register locations, 384 bytes of RAM, 256
bytes of data EEPROM and 8 Kbytes of user pro-
gram memory. The RAM space includes up to 128
bytes for the stack from 180h to 1FFh.
The highest address bytes contain the user reset
and interrupt vectors.
The Flash memory contains two sectors (see
ure
Figure 4. Memory Map
4) mapped in the upper part of the ST7 ad-
DFFFh
FFDFh
FFE0h
FFFFh
0FFFh
007Fh
01FFh
10FFh
E000h
0000h
0080h
0200h
1000h
1100h
Figure
Interrupt & Reset Vectors
Data EEPROM
HW Registers
Flash Memory
(see
(see
(384 Bytes)
(256 Bytes)
4, the MCU is capable of ad-
Reserved
Reserved
RAM
(8K)
Table
Table
2)
5)
FBFFh
FC00h
FFFFh
E000h
Fig-
00FFh
017Fh
01FFh
0080h
0100h
0180h
PROGRAM MEMORY
dressing space so the reset and interrupt vectors
are located in Sector 0 (F000h-FFFFh).
The size of Flash Sector 0 and other device op-
tions are configurable by Option byte (refer to
tion 15.1 on page
IMPORTANT: Memory locations marked as “Re-
served” must never be accessed. Accessing a re-
seved area can have unpredictable effects on the
device.
16-bit Addressing
Short Addressing
RAM (zero page)
128 Bytes Stack
8K FLASH
SECTOR 1
SECTOR 0
7 Kbytes
1 Kbyte
RAM
FFDFh
FFDEh
1001h
1000h
122).
see
see
section 7.1 on page 23
section 7.1 on page 23
RCCR0
RCCR1
RCCR0
RCCR1
ST7LITE2
9/133
sec-
1