R5F21256SNFP#U0 Renesas Electronics America, R5F21256SNFP#U0 Datasheet - Page 243

• Manufacturer Part Number: R5F21256SNFP#U0
• Description: IC R8C MCU FLASH 32K 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21256SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• For Use With: R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
Figure 14.73
TRDSRi register
TRDSRi register
TRDSRi register
TRDSRi register
TRDIOCi output
TRDIODi output
TRDIOBi output
The above applies under the following conditions:
Bits BFCi and BFDi in the TRDMR register are set to 0 (registers TRDGRCi and TRDGRDi are not used as buffer registers).
Bits EBi, ECi and EDi in the TRDOER1 register are set to 0 (enable TRDIOBi, TRDIOCi and TRDIODi pin outputs).
Bits TOBi and TOCi in the TRDOCR register are set to 0 (inactive level), the TODi bit is set to 1 (active level).
The POLB bit in the TRDPOCRi register is set to 1 (active level “H”), bits POLC and POLD are set to 0 (active level “L”).
i = 0 or 1
Feb 29, 2008
IMFC bit in
IMFD bit in
IMFA bit in
IMFB bit in
Count source
Value in TRDi register
Operating Example of PWM Mode
1
0
1
0
1
0
1
0
m
n
p
q
Initial output “H” to
Initial output “L” to
Page 224 of 485
Initial output “L” to
compare match
compare match
compare match
Active level “H”
Active level “L”
Set to 0 by a program
Set to 0 by a program
q+1
Inactive level “H”
Inactive level “L”
p+1
n+1
m+1
m: Value set in TRDGRAi register
n: Value set in TRDGRBi register
p: Value set in TRDGRCi register
q: Value set in TRDGRDi register
m-q
Set to 0 by a program
m-p
m-n
Set to 0 by a program
14. Timers