ST7FLITEU09B6 STMicroelectronics, ST7FLITEU09B6 Datasheet - Page 138

• Manufacturer Part Number: ST7FLITEU09B6
• Description: MCU 8BIT SGL VOLT FLASH 8-DIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITEU09B6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 5
• Program Memory Size: 2KB (2K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Processor Series: ST7FLITEUx
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Interface Type: ICC
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7FLITU0-D/RAIS, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connectivity: -
• Lead Free Status / Rohs Status: Details

Revision history
16
Table 83.
138/139
03-May-07
19-Jan-07
31-Oct-08
Date
Revision history
Document revision history
Revision
0.1
1
2
Initial release
Added note 1 to
Modified “A/D conversion” on page 83 and added “Changing the conversion
channel” on page 83
Updated
page
Modified EOC bit description in
Updated “Internal RC oscillator calibrated at 5.0 V” on page 99 and “Internal RC
oscillator calibrated at 3.3 V” on page 100
Supply current curved updated in
Updated
Added one R
Removed references to ST7LITEU02 part numbers
Modified reset configuration for pin n°6 in
Modified
Added
Modified
references to DVP3 and modified starter kit part number.
Modified
Modified “Electrostatic discharge (ESD)” on page 108
Modified temperature conditions for LU in
ADC accuracy maximum values inserted into tables in “10-bit ADC characteristics”
on page 118
IPU and RPU graphs updated,
Supply characteristics graphs updated,
RC oscillator consumption data table inserted,
Internal RC oscillator data tables updated, “Internal RC oscillator calibrated at
5.0 V” on page 99, “Internal RC oscillator calibrated at 5.0 V” on page 99
Consumption values for HALT mode inserted,
Format of the document changed
Status of the document modified (datasheet instead of preliminary data)
One paragraph added below
Section 13.7.3: Absolute maximum ratings (electrical sensitivity) on page 108
modified
Section 14.1: Package mechanical data on page 121
Soldering information section removed
Section 15: Device configuration and ordering information on page 127
109, and
Table 61 on page 106
Section 13.3.2 on page
Section 13.4.1 on page 101
Figure 14 on page 34
Table 81 on page
Table 60 on page 106
AIN
Section 13.3.2 on page 98
Table 2 on page 15
value and modified note 3 in
133: added note 4 for ST7MDT10-EMU3, removed
Figure 66 on page 117
Figure 53
(added AVDTHCR)
(N
Section 11.3.6 on page 84
98,
Section 13.4 on page 101
RW
Main changes
Section 13.3.3 on page
)
Section 13.4 on page 101
and
Table 2 on page 15
Section on page 109
Section 13.10 on page 118
Figure 54 on page 111
Section 13.4 on page 101
Section 13.4.2 on page 102
modified
ST7LITEU05 ST7LITEU09
98,
Section 13.8.1 on
updated