Z8F3221PM020SG Zilog, Z8F3221PM020SG Datasheet - Page 214

• Manufacturer Part Number: Z8F3221PM020SG
• Description: IC ENCORE MCU FLASH 32K 40DIP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F3221PM020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.620", 15.75mm)
• Processor Series: Z8F322x
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 29
• Number Of Timers: 3
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Development Tools By Supplier: Z8F64200100KITG, ZENETSC0100ZACG, ZUSBSC00100ZACG, Z8F64210100ZDA, Z8F64210100ZDP, Z8F64210100ZDV, Z8F64220100ZDA, Z8F64220100ZDV, Z8F6422AR00ZEM, Z8F6422VS00ZEM, Z8F6421AN00ZEM
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4643 - KIT DEV Z8 ENCORE XP 28-PIN269-4630 - DEV KIT FOR Z8 ENCORE 8K/4K269-4629 - KIT DEV Z8 ENCORE XP 28-PIN269-4628 - KIT DEV Z8 ENCORE XP 8-PIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4257; Z8F3221PM020SG

PS019918-1206
•
•
•
•
•
•
Write OCD Control Register (04H)—The Write OCD Control Register command
writes the data that follows to the OCDCTL register. When the Read Protect Option
Bit is enabled, the DBGMODE bit (OCDCTL[7]) can only be set to 1, it cannot be
cleared to 0 and the only method of putting the device back into normal operating
mode is to reset the device.
Read OCD Control Register (05H)—The Read OCD Control Register command
reads the value of the OCDCTL register.
Write Program Counter (06H)—The Write Program Counter command writes the
data that follows to the eZ8 CPU’s Program Counter (PC). If the device is not in
DEBUG mode or if the Read Protect Option Bit is enabled, the Program Counter (PC)
values are discarded.
Read Program Counter (07H)—The Read Program Counter command reads the
value in the eZ8 CPU’s Program Counter (PC). If the device is not in DEBUG mode
or if the Read Protect Option Bit is enabled, this command returns
Write Register (08H)—The Write Register command writes data to the Register File.
Data can be written 1-256 bytes at a time (256 bytes can be written by setting size to
zero). If the device is not in DEBUG mode, the address and data values are discarded.
If the Read Protect Option Bit is enabled, then only writes to the Flash Control
Registers are allowed and all other register write data values are discarded.
Read Register (09H)—The Read Register command reads data from the Register
File. Data can be read 1-256 bytes at a time (256 bytes can be read by setting size to
zero). If the device is not in DEBUG mode or if the Read Protect Option Bit is
enabled, this command returns
DBG ← 04H
DBG ← OCDCTL[7:0]
DBG ← 05H
DBG → OCDCTL[7:0]
DBG ← 06H
DBG ← ProgramCounter[15:8]
DBG ← ProgramCounter[7:0]
DBG ← 07H
DBG → ProgramCounter[15:8]
DBG → ProgramCounter[7:0]
DBG ← 08H
DBG ← {4’h0,Register Address[11:8]}
DBG ← Register Address[7:0]
DBG ← Size[7:0]
DBG ← 1-256 data bytes
DBG ← 09H
DBG ← {4’h0,Register Address[11:8]
DBG ← Register Address[7:0]
FFH
for all the data values.
Z8 Encore!
Product Specification
FFFFH
On-Chip Debugger
®
64K Series
.
201