MC9S12XET256MAA Freescale Semiconductor, MC9S12XET256MAA Datasheet - Page 1158

• Manufacturer Part Number: MC9S12XET256MAA
• Description: MCU 16BIT 256K FLASH 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XET256MAA

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 59
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 12x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-QFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 59
• Number Of Timers: 25
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• Package: 80PQFP
• Family Name: HCS12X
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|2.8|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 29 1024 KByte Flash Module (S12XFTM1024K5V2)
29.3.2.5
The FCNFG register enables the Flash command complete interrupt and forces ECC faults on Flash array
read access from the CPU or XGATE.
CCIE, IGNSF, FDFD, and FSFD bits are readable and writable while remaining bits read 0 and are not
writable.
1158
ECCRIX[2:0]
Offset Module Base + 0x0004
Reset
IGNSF
Field
Field
CCIE
2-0
7
4
W
R
CCIE
ECC Error Register Index— The ECCRIX bits are used to select which word of the FECCR register array is
being read. See
Command Complete Interrupt Enable — The CCIE bit controls interrupt generation when a Flash command
has completed.
0 Command complete interrupt disabled
1 An interrupt will be requested whenever the CCIF flag in the FSTAT register is set (see
Ignore Single Bit Fault — The IGNSF controls single bit fault reporting in the FERSTAT register (see
Section
0 All single bit faults detected during array reads are reported
1 Single bit faults detected during array reads are not reported and the single bit fault interrupt will not be
Flash Configuration Register (FCNFG)
0
7
generated
29.3.2.8).
= Unimplemented or Reserved
0
0
6
Section 29.3.2.13, “Flash ECC Error Results Register
Figure 29-9. Flash Configuration Register (FCNFG)
MC9S12XE-Family Reference Manual , Rev. 1.23
Table 29-14. FECCRIX Field Descriptions
Table 29-15. FCNFG Field Descriptions
0
0
5
IGNSF
0
4
Description
Description
0
0
3
(FECCR),” for more details.
0
0
2
Freescale Semiconductor
FDFD
0
1
Section
29.3.2.7)
FSFD
0
0