UPD78F0551MA-FAA-AX Renesas Electronics America, UPD78F0551MA-FAA-AX Datasheet - Page 355

• Manufacturer Part Number: UPD78F0551MA-FAA-AX
• Description: MCU 8BIT 16-SSOP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx2-Lr

Specifications of UPD78F0551MA-FAA-AX

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: I²C, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 9
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0/Kx2-L
R01UH0028EJ0400 Rev.4.00
Sep 27, 2010
Note
Cautions 1. When TMHE0 = 1, setting the other bits of TMHMD0 is prohibited. However, TMHMD0 can be
Remarks 1. f
2.
2. TMC506: Bit 6 of 8-bit timer mode control register 50 (TMC50)
2. In the PWM output mode, be sure to set the 8-bit timer H compare register 10 (CMP10) when
3. The actual TOH0/P15 pin output is determined depending on PM15 and P15, besides TOH0
• Mode in which the count clock is cleared and started upon a match of TM50 and CR50 (TMC506 = 0)
• PWM mode (TMC506 = 1)
Note the following points when selecting the TM50 output as the count clock.
It is not necessary to enable (TOE50 = 1) TO50 output in any mode.
Start the operation of 8-bit timer/event counter 50 first and then enable the timer F/F inversion operation
(TMC501 = 1).
Start the operation of 8-bit timer/event counter 50 first and then set the count clock to make the duty =
50%.
TMC501: Bit 1 of TMC50
PRS
refreshed (the same value is written).
starting the timer count operation (TMHE0 = 1) after the timer count operation was stopped
(TMHE0 = 0) (be sure to set again even if setting the same value to CMP10).
output.
: Peripheral hardware clock frequency
CHAPTER 8 8-BIT TIMERS H0 AND H1
341