TJA1042T/3,112 NXP Semiconductors, TJA1042T/3,112 Datasheet - Page 7

• Manufacturer Part Number: TJA1042T/3,112
• Description: IC CAN TRANSEIVER HS 8SOIC
• Manufacturer: NXP Semiconductors
• Type: Transceiverr

Specifications of TJA1042T/3,112

• Number Of Drivers/receivers: 1/1
• Protocol: CAN
• Voltage - Supply: 4.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
8. Limiting values
Table 5.
In accordance with the Absolute Maximum Rating System (IEC 60134). All voltages are referenced to GND.
TJA1042
Product data sheet
Symbol Parameter
V
V
x
trt
voltage on pin x
transient voltage
Limiting values
7.3.2 V
Pin V
microcontroller supply voltage (see
pins TXD, RXD and STB to the I/O levels of the microcontroller. Pin V
internal supply voltage for the low-power differential receiver of the transceiver. For
applications running in low-power mode, this allows the bus lines to be monitored for
activity even if there is no supply voltage on pin V
For versions of the TJA1042 without a V
This sets the signal levels of pins TXD, RXD and STB to levels compatible with 5 V
microcontrollers.
Fig 3.
IO
supply pin
IO
on the TTJA1042T/3 and TJA1042TK/3 should be connected to the
Stabilization circuitry and application for version with SPLIT pin
All information provided in this document is subject to legal disclaimers.
Conditions
no time limit; DC value
on pins CANH and CANL
V
in normal mode;
otherwise floating
SPLIT
on pins CANH, CANL and SPLIT
on any other pin
Rev. 6 — 23 March 2011
= 0.5 V
CC
Figure
High-speed CAN transceiver with Standby mode
IO
V
TJA1042T
R
R
GND
CC
pin, the V
7). This will adjust the signal levels of
CC
SPLIT
CANL
CANH
IO
.
input is internally connected to V
60 Ω
60 Ω
015aaa020
[1]
Min
58
0.3
150
IO
TJA1042
© NXP B.V. 2011. All rights reserved.
also provides the
Max
+58
+7
+100
7 of 22
Unit
V
V
V
CC
.