PIC16F876A-E/SS Microchip Technology, PIC16F876A-E/SS Datasheet - Page 187

• Manufacturer Part Number: PIC16F876A-E/SS
• Description: 28 PIN, 14KB ENH FLASH, 368 RAM, 22 I/O,
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F876A-E/SS

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SSOP
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 1 x 16 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163022, DV164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.6
1997 Microchip Technology Inc.
Timer1 Oscillator
A crystal oscillator circuit is built in between pins T1OSI (input) and T1OSO (amplifier output). It
is enabled by setting the T1OSCEN control bit (T1CON<3>). The oscillator is a low power
oscillator, rated up to 200 kHz operation. It will continue to run during SLEEP. It is primarily
intended for a 32 kHz crystal, which is an ideal frequency for real-time keeping.
the capacitor selection for the Timer1 oscillator.
The Timer1 oscillator is identical to the LP oscillator. The user must provide a software time delay
to ensure proper oscillator start-up.
Table 12-1: Capacitor Selection for the Timer1 Oscillator
Crystals Tested:
32.768 kHz
100 kHz
200 kHz
Note 1: Higher capacitance increases the stability of oscillator but also increases the start-up
Note:
2: Since each resonator/crystal has its own characteristics, the user should consult the
Osc Type
time.
resonator/crystal manufacturer for appropriate values of external components.
LP
This allows the counter to operate (increment) when the device is in sleep mode,
which allows Timer1 to be used as a real-time clock.
Epson C-001R32.768K-A
Epson C-2 100.00 KC-P
STD XTL 200.000 kHz
100 kHz
200 kHz
32 kHz
Freq
Section 12. Timer1
33 pF
15 pF
15 pF
C1
DS31012A-page 12-7
20 PPM
20 PPM
20 PPM
Table 12-1
33 pF
15 pF
15 pF
C2
shows
12