PIC16F876A-E/SS Microchip Technology, PIC16F876A-E/SS Datasheet - Page 34

• Manufacturer Part Number: PIC16F876A-E/SS
• Description: 28 PIN, 14KB ENH FLASH, 368 RAM, 22 I/O,
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F876A-E/SS

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SSOP
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 1 x 16 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163022, DV164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
2.3
DS31002A-page 2-4
Crystal Oscillators / Ceramic Resonators
In XT, LP or HS modes a crystal or ceramic resonator is connected to the OSC1 and OSC2 pins
to establish oscillation
cut crystal. Using a series cut crystal may give a frequency out of the crystal manufacturer’s
specifications. When in XT, LP or HS modes, the device can have an external clock source drive
the OSC1 pin
Figure 2-1: Crystal or Ceramic Resonator Operation (HS, XT or LP Oscillator Mode)
Note 1: A series resistor, R
(Figure
2: The feedback resistor, R
3: Depending on the device, the buffer to the internal logic may be
either before or after the oscillator inverter.
C1
C2
2-3).
(Figure
Rs
XTAL
2-1). The PICmicro oscillator design requires the use of a parallel
(1)
OSC1
OSC2
S
, may be required for AT strip cut crystals.
R
F (2)
F
, is typically in the range of 2 to 10 M
PIC16CXXX
To internal logic
SLEEP
To internal logic
1997 Microchip Technology Inc.
(3)
(3)